User Manual Before operating this unit, please read the user manual completely and keep it.
CONTENTS Safety Precaution....................................................................................................................1 Important Information..............................................................................................................3 Product Overview....................................................................................................................4 Packing List.........................................................................................
Range Hood Dear users: Thank for your buying our range hood. Please accept our best regards.Please read this user manual carefully before installation and operation. *The pictures in this manual only for your reference. If the picture isn’t accord with object, subject to object. We keep to right to update appearance, structure or products without notice. Safety Precaution In order to avoid harm or property damage to the users or other person, the following distinction and marks are stipulated.
Range Hood Warning Range hood must be installed, disassembled or maintained by Prohibit Prohibit professional person. Disassembly Put out the stove fire in time when it is not used. That the stove fire bakes the range hood directly is prohibited. Do not barbecue food directly under the range hood lest the range hood is damaged and an accident should occur.
Range Hood Notice The gas from range hood shall not be Prohibit The temperature for range hood exhausted to hot flue used for burning gas or Strict Execution other fuels. working can’t exceed 40℃. Because the installation is difficult and Before removing range hood for hood is heavy, the installation shall be Strict Execution executed by professional person based installation, clean or maintainance , Strict power must be cut off avoiding from Execution electric shock.
Range Hood Product Overview Technical Specification Model Noise CXW-220-A670 Power Supply 57dB 220-240V~ 50Hz Rated Input Power of the Hood 222W Total Pressure Efficiency ≥23% Rated Input Power of the Main Motor 220W Nominal Pressure 340Pa Maximum Input Power of the Light ≤2W Air Flow Rate 19m /min 3 Dimensions (L×W×H) 895×399×548(mm) Maximum Static Pressure 430Pa Net Weight of the Host 27.
Range Hood Installation Warning 1.The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels,the discharge of air must fulfill the requirements of local regulations . 2.Note that when installing the metal expansion pipe, the pipe shall match with the hole in size. Overlarge hole is prohibited, as it will result in loose pipe and accidental drops. 3.
Range Hood Hole size of the exhaust pipe Φ200mm Installation Figure 2 Walls Note: All data units in the following figures are in mm Figure 1 391 399 215 Movable decorative panel (homemade) 848~948 10 350 895 Ceiling hole sizes (Projection size of the hood top) 500 800~850 300~400 10 1. Determine the position: Preliminary dimensions of cabinet is shown as Figure 1, ceiling hole size is shown in .
Range Hood c. Drill hole through the wall: Determine the location of the aluminum foil exhaust pipe against the wall and draw the drilling range (i.e. a circle slightly larger than the pipe OD). Then use a long drill bit to drill through the wall. Pay attention to the wall structure and material, so as not to destroy other parts of the wall.
Range Hood In the standby status, press the airflow button, the smoke deflector will be unfolded, and the fan will run at “Level-2”; then repressing the airflow button, the fan will run at Air Flow Rate “Level-1”, and then press again to shut down the fan. Press the light button to turn on the light and repress to turn it off. (Press the light button in off mode, the smoke deflector and the light will be turned on at the same time.
Range Hood Notice ●The hood shall be cleaned and maintained regularly depending on the surroundings, so as to keep its cleanness & efficiency and extend its service life. We recommend that: Clean the exhaust fume collecting hood and hood body after each cooking. To ensure smooth discharge of fumes, the filter screen shall be cleaned regularly according to actual situations. Be careful to avoid damage when cleaning.
Range Hood Removal of switch Deflector Small cover plate Switch assembly Take out the switch assembly and unplug the Keep pressing the cleaning icon to unfold smoke deflector, and unplug the power plug. Removing the two screws on the small cover plate by a screwdriver, and take the small cover plate as per the direction of the arrow. connection line for maintenance and replacement.
Range Hood Removal of the whole body Removal steps 1. Keep pressing the cleaning icon to lock the smoke deflector in the open condition. Then take off the filter screen according to filter removal steps and unscrew four screws on the retaining ring. 2. Close the smoke deflector and pluck the power plug; 3. Screw out the screws on the back board to remove it. Then unscrew each four screws of the air outlet and the border of air passage and remove the air passage; 4.
Range Hood Circuit diagram Terminal box EL Control circuit yellow C 220-240V~ M L N XP red K3 brown orange gray black K2 blue K1 brown blue Electric putter Green/Yellow K4 Operating Circuitn blue red blue red Green/Yellow E Troubleshooting of General faults No. Fault Cause No response after pressing any button The power plug is not connected 1 (e.g. the impeller does not rotate, or properly or there is power failure the light is off) 2 3 4 5 6 1.
Model : A670 Edition: A/ 0 Publication Date:August,1,2017