User Manual

7. Lift the range hood, hang the back hook at the hitching leg and use a level ruler to ensure that the machine is

horizontal.

8. Fix the range hood with four M5×40 screws from the bottom plate of the upper cabinet and fix with at least two screws

before freeing it from the hand.

9. If there is a large gap between the cabinet bottom plate and the range hood, please add cushion block according to

gap size near four M5×40 screws before installation, so as not to make the range hood enclosure deform and affect use

when fastening the screws.

Note: two or more persons are required to install this range hood for safety.

M5×40 screw

Upper cabinet

bottom plate

Range

hood

Gasket

Block

6. Paste the opening sample plate with the text surface downwards on the bottom plate of the upper cabinet, and use

the electric saw and the drill bit of diameter (7mm) to open holes according to the requirements on the opening

sample plate.

Note: wear the goggles and gloves when opening the holes.