User Manual

User Manual
Turn on the power and the buzzer will sound, indicating the power state.
Press the power button to enter the standby state, and the icon of the power button will be
always on.
If only the light is on, press the power button again to turn off the light directly;
When the fan is running, press the power button to make the power button icon flash and
the range hood enter the delay status. All functions will be automatically turned off after 1
minute;
If the power button icon is flashing, press the power button to turn off all functions.
If there is no operation within 3 minutes in standby state, enter the off state.
①
②
③
When the power button is on:
①Press the first time to enter the turbo gear, and the turbo/high gear icon flashes. 3 minutes
later, switch to the high gear and the icon is always on;
②Press the second time to enter the high gear, and the turbo/high gear icon light is on;
③Press the third time to turn off the high gear function, and the turbo/high gear light is off.
41
Wave inductionLighting
Clean
Low
Power
Turbo/High
When the power button is on, press the low gear button. The low gear icon is always on and
the impeller rotates at a low speed for smoke extraction. Press this button again to turn off the
low gear.
12. After installation, the range hood must be kept horizontal. In the end, insert the oil cup and power it for test run.
Min 29-
(750 )
Max 32- ”
(825 mm)
9
/16”
mm
1
/2
3
/8”
(10mm)
3
/8”
(10mm)
Min 15-
mm
Max 29- ”
(755 mm)
3
/4”
(400 )
3
/4
Power
Turbo/High
Low
Range Hood