User Manual

2.Take down the switch assembly according to the switch disassembly steps;

3.Take down the filter according to the filter disassembly steps;

4.Unscrews the screw on the back plate, remove the back plate, unscrew the screws on the air duct outlet, remove the

air duct and unscrew the 6 screws on the check ring;

5.Unscrew the cap clockwise and take out the impeller vertically;

The assembly steps are opposite to the disassembly steps.

(When installing the impeller, please apply some lubricating oil in the axle hole of the impeller.)

Take down the lamp according to the lamp disassembly steps;

Hood disassembly

Filer disassembly

Magnetic clasp

Neck

1. Long press the cleaning button to open the air deflector.

2. Hold the two magnetic clasps on the filter with both hands, slightly exert force outwards to make the filter no longer

be absorbed, then lift the filter according to the direction of the arrow to make it separated from the neck, and finally

pull out the filter to clean the filter.

Back plate

Duct

Motor

Impeller

Cap

Check ring

Mainframe

Filter

Air deflector

Oil cup

The body may not be disassembled under

normal circumstances.

The disassembly work should be completed

by professional maintenance personnel.

Range Hood