User Manual A8 17 Before operating this unit, please read the user manual completely and keep it. If the manual is lost, you can send e-mail to overseas@robam.com, request for an electronic manual.
CONTENTS Safety Precaution....................................................................................................................1 Important Information..............................................................................................................4 Product Overview....................................................................................................................5 Packing List.........................................................................................
Range Hood Dear users: Thank for your buying our range hood. Please accept our best regards.Please read this user manual carefully before installation and operation. *The pictures in this manual only for your reference. If the picture isn’t accord with object, subject to object. We keep to right to update appearance, structure or products without notice. Safety Precaution In order to avoid harm or property damage to the users or other person, the following distinction and marks are stipulated.
Range Hood Danger Unplug before cleaning,installing or maintaining,avoiding from electric Strict shock. Execution Please turn off range hood immediately if pan got fire (range hood shall aggravate fire if it’s working) and extinguish fire by effective action. Strict For example, cover flame by metal cover, turn off gas valve immediately Execution and remove inflammable things. Strict Execution Any abnormal, please turn off power, take off plug or cut off electric source, and contact service.
Range Hood Warning Strict Execution All operation must comply with our safety guidelines as well as local safety regulations. There shall be adequate ventilation of the room when the range hood is Strict used at the same time as appliances burning gas or other fuels. Execution This appliance just for household use only.And it’s not allowed to exhaust dangerous or explosive matter or air. It should be put under dry and Strict Execution ventilation environment without dangerous air.
Range Hood Notice Because the installation is difficult and hood is heavy, the installation Strict shall be executed by professional person based on manul. Execution Strict Execution Don't break electric wire or other invisible equipment when cutting something or drilling holes on ceiling. When range hood is using in well sealed building, it should have air inlet Strict or open door to ensure good ventilation. Execution When the oil exceeds 2/3 or near tick mark in the oil cup, clean it in Strict time.
Range Hood Product Overview Technical Specification CXW-220-A817 CXW-220-A815 Noise ≤58dB Rated Power Input A817:222W A815:224W Power Supply 220-240V~ 50Hz Rated Main Motor Power Input 220W Total Pressure Efficiency ≥22% Lamp Power (max) Nominal Wind Pressure 220Pa A817:≤2W A815:≤2W×2 Airflow 18m /min 3 Dimension (L×W×H) A817:895×500×537(mm) A815:895×505×537(mm) Max static pressure 340Pa Net Weight 22kg Normal Odour Reduction Factor ≥98% Grease Absorption Factor ≥92% Instantaneo
Range Hood Installation Warning 1.The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels, the discharge of air must fulfill the requirements of local regulations. 2.Note that when installing the metal expansion pipe, the pipe shall match with the hole in size. Overlarge hole is prohibited, as it will result in loose pipe and accidental drops. 3.
Range Hood Installation ●Determine the position The size of removable baffle (reference: 430mm) can be adjusted according to the actual situations. The installation pitch of holes is shown in Figure 2. The hood body shall be centered vertically and kept level. Ceiling hole size is shown in Figure 3. The hood shall be installed right above the hob.
Range Hood ●Adjust drawing panel Pull the two brackets of the drawing panel upwards to an appropriate height and then pull out the drawing panel by holding both sides. Remove the protective film (excluding cold plate materials) on the drawing panel and insert it along the gap between the main hood panel and the housing. Then adjust it to the proper height. ●Install hood body Fix the check valve as shown in Figure 5.
Range Hood User Manual Switch Control Panel Plug in and 3 ticks from the buzzer will indicate qualified installation. Now the hood is in standby. Under standby mode, press the “Lighting” button once to turn on the light and repress to turn off. Each press will trigger a tick from the buzzer. The “Lighting” button only controls the light. Lighting Under power-on mode, press the “Low” button and the impellers will rotate at low speed to inhale smoke (which shows the low level is switched on).
Range Hood Notice ● The hood shall be cleaned and maintained regularly depending on the surroundings, so as to keep its cleanness & efficiency and extend its service life. We recommend that: Clean the exhaust fume collecting hood and hood body after each cooking. To ensure smooth discharge of fumes, the filter screen shall be cleaned regularly according to actual situations. Be careful to avoid damage when cleaning.
Range Hood Lamp image Lamp information 252 25.6 52 A817 Rectangular LED Lamp Type(A815) Round LED Max Power 2W Voltage 12VDC Dimension see the lamp image 29.7 2 Ø7 57.5 34 A815 Lamp Type(A817) Removal of switch ●Removal of A817 switch After removing the spotlight, remove the two screws on the switch with a cross screwdriver and move the switch assembly diagonally upward to take it out from the lamp hole for repair and replacement.
Range Hood Removal steps of the whole range hood Removal steps 1. Pull out the plug; 2. Unscrew the four screws from the back of the main hood panel. Tilt the panel forward to a certain angle, and then pull it up forcibly; 3. Remove the drawing panel from the main hood panel; 4. Use a cross screwdriver to unscrew the fastening screws on the cover to remove the cover; 5. Unscrew the fastening screws on the retaining ring to remove the retaining ring; 6.
Range Hood Circuit diagram A817 Circuit Diagram M L N 220-240V~ XP yellow orange grey black blue brown brown blue K3 C K2 Operating Circuit blue red EL Green/Yellow Terminal box Control circuit blue K4 red K1 Green/Yellow E A815 Circuit Diagram Terminal box blue red EL Green/Yellow 220-240V~ M L N XP blue red yellow orange grey black blue brown brown blue Control circuit K4 C K3 K2 Operating Circuit EL blue red K1 Green/Yellow E Troubleshooting of General faults No.
Edition: A/2 Publication Date：May,15,2017
