User Manual

34
To Delay Start Self-Clean:
1. Press START TIME.
2. “--:--” will be displayed, and “Set time to delay. Then Press START” will scroll
from right to left in the selected oven text area. Use the number keypad to enter
the desired time to delay.
3. Press START. “Select cooking/cleaning mode” will scroll in the selected oven
text area.
4. Press SELF CLEAN. “Remove Racks” will scroll in the selected oven text area for
5 seconds, followed by “Select Option.”
5. “Select Level” and “Press 1. Level 1 (Quick) 2. Level 2, 3. Level 3, 4. Level 4 (reg),
5. Level 5, 6. Level 6 (Maxi)” will scroll in the display text area.
6. Press a number on the keypad to select the clean level.
7. Press START. The cleaning cycle will begin when the start time is reached.
When the self-clean cycle ends:
“COMPLETE” appears in the display and the oven door unlocks.
8. Open the oven door.
9. Once the oven has completely cooled, remove ash with a damp cloth.
NOTE: To avoid breaking the glass, do not apply a cool, damp cloth to the inner
door glass before it has completely cooled.
REPLACING AN OVEN LIGHT
WARNING
Electrical Shock Hazard
Make sure the oven and lights are cool and power to the oven has been
turned off before replacing the light bulb(s).
The lenses must be in place when using the oven. The lenses serve to
protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
The oven light is a standard 25 watt (G9) appliance bulb.
IMPORTANT: Before replacing the bulb, make sure the oven is cool and the controls
are turned o.
1. Disconnect power at the main power supply (fuse or breaker box).
Dual Fuel Range