User Manual
Instructions and User Manual
ENGLISH
16
CONTROL THROWS
Function Normal Speed Thermal Landing
Elevator +3 mm / -3 mm; 15% Expo
Rudder /
Ailerons +10 mm / -8 mm; 25% Expo
Brake +13mm, and ELEV -1mm
ENDING
Now look for a day with suitable weather conditions for the rst ight. With the mentioned settings you will be spared bad surprises. We recommend, at least on the rst ight, to make the start with a starting helper.
Enjoy your new model aircraft and „always happy landings!“.
WING
21
Glue the servo covers with UHU POR. So the covers
can be easily removed again later.
ARF
22
Screw the fuselage and wing by the enclosed M4 screw.
ARF
23
In the last step, mark the center of gravity on the underside of the wing and move the battery until
the center of gravity meets our specications.
ARF
24
Due to the high propeller speed, only the propellers made of carbon by RASA are recommended by us
may be used. For other products, there is a risk of the propellers tearing o. Now look for a day with suita-
ble weather conditions for the rst ight. With the mentioned settings you will be spared bad surprises.
We recommend, at least on the rst ight, to make the start with a starting helper.
ARF
PNP
PNP
PNP