User Manual
11
ENGLISH
SPECIFICATIONS
NEEDED ACCESSORIES
INTRODUCTION
Congratulation that you took the choice to purchase this Robbe RC model airplane, a very good
choice from our point of view.
We put a lot of attention to the overall quality of the airplane in terms of de-sign, performance and
manufacturing quality. We used all of our experience designing and building high quality aircraft in
order to present you an exceptional product. We chose high grade material and looked after high
end accessories in order to ensure top level outcome in terms of function, performance and
durability of the product. We are open and offer all necessary support in case you should find any
problem with your airplane.
As you are well aware this is a technical product. Due to its nature it is required if not mandatory to
read the instrucon manual completely. Please follow the steps to complete your model as descri-
bed. It will ensure that your model will turn out in the best possible way. Please also take noce and
good care about the warning messages at the end of the instrucon manual. Knowing about them
ensures that you can operate the model in the safest possible manner keeping risk away from you
and other persons. Also ensure that you comply with the latest legislation in terms of flight safety.
We wish you all the best for building and especially operating your RC air-plane. In case you
have any questions please contact us. We are driven to offer the best possible support at any
time.
Span 2000 mm
Length 1170 mm
Flying weight 1780 g
Wing area 37,95 dm²
Airfoil RG-15 mod.
ARF-Version PNP-Version
Motor RO-Power 3522 (1100 kV) RO-Power 3522 (1100 kV) built-in
ESC RO-Control 6-80A RO-Control 6-80A
Servos 6x FS-155MG 6x FS-155MG built-in
Servo cables Appr. 2m built-in
Mullock
MPX plugs 2 pair MPX plugs built-in
Battery 4S LiPo 2000-2500mAh 4S LiPo 2000-2500mAh
Propeller 11 x 8“ 11 X 8“ included
Spinner 38mm 38mm included
TX min. 5 Channels min. 5 Channels
RX min. 7 Channels min. 7 Channels
Glues 5min epoxy resin
UHU Por, Velcro tape
5min epoxy resin
UHU Por, Velcro tape