Operating instructions

21
Operating Instructions - BLUE ARROW CP120 S-FHSS RTB 2.4 GHz No. S2540
3. Flying square circuits
The next step is to fly a square circuit with the model. Allow the heli-
copter to fly straight ahead for about two metres, then turn it through
90° using the tail rotor. Repeat this procedure until the model has
completed a square circuit. Fly squares in the clockwise and anti-
clockwise direction, so that you are using the controls in all directions.
Repeat the procedure until you are confident at flying neat square
circuits.
4. Flying figures-of-eight
When you feel confident with all the steps outlined above, it is time to
move on to figures-of-eight. Please bear in mind that the roll and pitch-
axis control functions are effectively reversed when the model is flying
towards you. During all parts of the manoeuvre take care to keep the
model at a steady height. Repeat the manoeuvre until you are sure of
what you are doing.