Operating instructions

9
Operating Instructions - BLUE ARROW CP120 S-FHSS RTB 2.4 GHz No. S2540
1
2
3
4
5
6
789
10 11
No.
1
2
3
4
5
6
7
8
9
10
11
Brief description
RUDD
ELEV
AILE
PIT
THRO
AUX
RUDD EXT.
ELEV / AILE EXT.
ELEV / AILE G.
ADJ - WK
LED
Function
To be connected to the tail rotor servo
To be connected to the pitch-axis servo
To be connected to the roll servo
To be connected to the collective pitch servo
To be connected to the speed controller's signal wire;
receives the control signals for the main drive motor
To be connected to the FHSS module
This pot is used to adjust the maximum travel of the tail rotor servo
This pot is used to adjust the maximum travel of the pitch-axis and roll servos
Gyro gain adjuster
for the pitch and roll axes
The switch must be moved to the ADJ (adjustment) position once in order to adjust the mechanical system.
Selecting ADJ mode sets all the servos to neutral (centre)
Indicates receiver status during binding and receive operations
Description
Tail rotor servo
Pitch-axis (elevator) servo
Roll servo
Collective pitch servo
Throttle
AUX
Tail rotor servo travel adjuster
Pitch-axis / roll servo travel adjuster
Adjusters for head gyro gain.
Flight mode switch (switch 2)
LED
Receiver functions:
Connector orientation
The white wire must face forward
The white wire must face forward
The white wire must face forward
The white wire must face forward
The white wire must face forward