NEW ITEMS 2014
Contents robbe Academy ............................................. 2 Aircraft Gliders................................................................................................. 4 Power models .................................................................................... 8 Aircraft accessories Ropulsion engines........................................................................... 20 Model helicopters Nine Eagles..........................................................................
General Link Modul S-FHSS 2.4 GHz No. NE480193 S-FHSS General Link The second generation of the robbe / Nine Eagles „General Link System“ now exploits the FUTABA S-FHSS transmission system. Models with the new transmission system are indicated by the „FTR“ suffix (FUTABA Transmitter Ready). With these models you can choose between the „RTB“ (Ready-ToBind) version, i.e. without transmitter in the set, or the „RTF“ (Ready To Fly) version, with Nine Eagles S-FHSS transmitter included in the set.
AKADEMIE lernen • staunen • erleben Glider flying 2014 Impressive gliding sites - Enjoy the company of other RC glider pilots - Broaden your knowledge Experience model gliding at Europe‘s most beautiful soaring slopes – Wasserkuppe (Germany), Petit Ballon (France) or Hahnenmoos (Switzerland). Under the watchful eye of robbe‘s expert seminar tutors you can experience these wonderful soaring sites, which are renowned far beyond their national boundaries.
The world-famous Wasserkuppe - the glider flyer‘s mountain - offers launching facilities in almost all compass directions. The robust Arcus Sport thermal / slope soarer (Art. No. 3188) features a four-flap wing. Ideal for practising flying with camber-changing flaps. Getting started in slope flying Wasserkuppe (Rhön) A little theory is also provided.
4
Arcus E 2.2 ARF emi-scale model glider with S comprehensive technical features Our model of the Arcus E 2.2 closes the gap between moulded EPO foam gliders intended for beginners and the larger scale gliders of wood or GRP construction. The Arcus E 2.2 gives the advanced model glider pilot the opportunity to exploit the numerous technical features of large models - such as retractable power unit, airbrakes and retractable wheel - in a low-cost model.
6
L-Spatz 55 cheibe L-Spatz 55 – THE S vintage semi-scale glider from robbe, with a wingspan of 2.5 m. The robbe L-Spatz 55 is a scale model of the vintage classic sailplane. The model is of conventional built-up all-wood construction, covered in iron-on fabric. Radio control system and electronics not included. The full-size The Scheibe L-Spatz 55 was a development of the Spatz A and Spatz B.
8
Mustang P51 3G FTR RTF 2.4GHz Mustang P51 3G FTR RTF No. NE2004FTR 2.4GHz Mustang P51 3G FTR RTB No. NE2004RTB 2.4GHz FUTABA Transmitter Ready – FUTABA Code Inside The Nine Eagles Mustang P51 3G FTR RTF is a compact, true-scale power model aircraft fitted with the advanced 3G stabilisation system. The new, revised version now features a four-channel radio control system with elevator, rudder and aileron control, and a new, finely detailed colour scheme.
10
YAK-54 3G FTR RTF 2.4GHz YAK-54 3G FTR RTF 2.4GHz No. NE2005FTR YAK-54 3G FTR RTB 2.4GHz No. NE2005RTB FUTABA Transmitter Ready – FUTABA Code Inside The Nine Eagles YAK-54 3G FTR RTF is a compact, true-scale power model aircraft fitted with the advanced 3G stabilisation system. The new, revised version is now supplied with a four-channel radio control system with elevator, rudder and aileron controls, and a new, highly detailed colour finish.
12
Bellanca 450 3G FTR RTF ompact, true-scale power C model aircraft fitted with the advanced 3G stabilisation system and RTF set contents, suitable for beginners. The Nine Eagles Bellanca 450 3G FTR RTF is a compact, true-scale power model aircraft fitted with the advanced 3G stabilisation system. With its benign flying characteristics, complete RTF set contents and electronic triple-axis stabilisation, the Nine Eagles Bellanca 450 is an excellent choice for the beginner.
14
Edge 540 3G FTR RTF ompact, scale aerobatic model C with the advanced 3G stabilisation system, FUTABA S-FHSS compatible. The Nine Eagles Edge 540 3G FTR RTF is a compact, true-scale aerobatic model aircraft fitted with the advanced 3G stabilisation system. The Edge 540 3G‘s fast, direct flying characteristics make it suitable for advanced pilots with prior flying experience. The powerful brushless motor provides ample reserves of power as required for an aerobatic model.
16 Illustration depicts an assembled model.
Grob G 120TP Nano-Racer Maxi-speed at nano-scale Like the full-size machine and our large Grob G120TP 1700 mm ARF model, this nanomodel is extremely fast and fully aerobatic, while its broad speed range is also ideal for realistic flying in the scale style. The model‘s aerobatic repertoire can be expanded by installing the optional rudder servo and linkage. The aeroplane is based on a one-piece painted foam moulding incorporating fuselage and wings.
18 Illustration depicts an assembled model.
Pilatus PC21 Nano-Racer emi-scale model of a fast S aerobatic trainer Set contents • Pre-painted EPO foam parts set (fuselage / wing, fin, tailplane, fuselage hatch with cockpit), decals applied • Painted plastic cowl • Factory-fitted brushless motor and speed controller • 5.5 x 4.
20
Ropulsion Turbine Telemetrie Turbine RP 100 Telemetrie No. T0100 Turbine RP 140 Telemetrie No. T0140 Turbine RP 175 Telemetrie No. T0175 The new telemetry-capable robbe Ropulsion turbines robbe Ropulsion telemetry Superb quality, telemetry and digital S. BUS technology for jet engines The robbe Ropulsion telemetry turbine series has been developed jointly with the turbine manufacturer Jetcat, which is renowned for its high-quality turbines.
• Turbine status This menu field provides constant and detailed information on the turbine’s operational states (e.g. start process or shut-down process) All transferred telemetry parameters feature an alarm function which allows the user to define critical values beyond which an alarm is generated, optionally via speech output and / or vibration and / or display. Ropulsion quality robbe Ropulsion telemetry turbines are designed and manufactured in accordance with the latest findings.
Turbine RP 100 Telemetrie operating mode the pilot defines or sets the turbine thrust directly using the throttle stick . If the Airspeed Sensor is connected, the ECU can also switch to what is known as „speed control“ mode (= regulated airspeed). In this mode the turbine thrust is automatically controlled by the ECU, so that the model accelerates to and maintains a pre-defined nominal airspeed. RP Ground Support Unit Mini RP airspeed sensor No. T1005 No.
24
Galaxy Visitor I RTF 2.4 GHz Mode 2No. NE2525 ow-cost mini-quadrocopter L with on-board video / stills camera The Galaxy Visitor I is a low-cost mini-quadrocopter which is an ideal choice for the beginner. The Dual Rate function enables the pilot to choose how the model responds to transmitter commands, so that its response matches his skill level. Experienced pilots who have already mastered the model can fly interesting 3D manoeuvres using the Flip (somersault) function.
26
Galaxy Visitor II FTR RTF 2.4GHz Galaxy Visitor II FTR RTF No. NE2528M1 2.4GHz M1 Galaxy Visitor II FTR RTF No. NE2528FTR 2.4GHz M2 High-End mini-quadrocopter with numerous auxiliary functions The GALAXY VISITOR 2 is a mini-quadrocopter of the latest generation with a stylish look. Its switchable flying characteristics make it equally suitable for beginners and advanced pilots. Equipped with a 2.
28
Galaxy Visitor II FTR RTF 2.4GHz The highly developed nine-way gyro and stabilising system supplied as standard will delight the beginner and advanced pilot in equal measure. It features a total of nine sensors for optimum stabilisation: triple-axis gyro + triple-axis accelerometer + triple-axis field strength sensor. Two flight modes can be selected at the transmitter.
30
Draco V5 RTF isually and technical revised V version of the popular beginners‘ helicopter The Draco V5 RTF is an ideal trainer helicopter for the beginner to model flying.
32
Solo Pro 232 Nightflight RTF FTR No. NE2527FTR UTABA Transmitter Ready – F FUTABA Code Inside The Solo Pro 232 is completely equipped with an innovative 2.4 GHz LCD radio control system, LiPo battery, mains battery charger, video and still camera unit with HD resolution (1280 x 720 pixels), 2 GB Micro-SD memory card and USB reader adapter for the memory card. Futaba Transmitter Ready (FTR) The 2.
34
Solo Pro 137 BO105 Military SR FTR RTF No. NE3526 he Solo Pro 137 BO105 Military SR FTR T RTF helicopter is a compact, extremely realistic model of the familiar BO105 multi-role helicopter. The plastic scale fuselage is particularly well detailed, ensuring that the model looks very realistic in the air. A magnetic cabin latch ensures fast, easy battery swaps. The single-rotor design is ideal for the advanced beginner, and offers extremely stable flying characteristics.
36
Solo Pro 135 BO105 Military CP FTR RTF No. NE3527 he Solo Pro 135 BO105 Military CP FTR T RTF helicopter is a compact model of the renowned BO105 multi-role helicopter produced to a high scale standard. The plastic scale fuselage is particularly well detailed, ensuring that the model looks very realistic in the air. The CP version is fitted with a sophisticated and convincing four-blade rotor head with collective pitch which underlines its scale aspirations.
38
Solo Pro 290 Lama FTR RTF 2.4 GHz Solo Pro 290 Lama FTR RTF 2.4 No. NE3516 GHz Solo Pro 290 Lama FTR RTB No. NE3516RTB FUTABA Transmitter Ready – FUTABA Code Inside The Solo Pro 290 is a finely detailed replica of the French SA-315 Lama multi-role helicopter. A characteristic feature of this helicopter is the distinctive lattice frame, which our model also reproduces realistically.
40
Solo Pro 229 EC145 Solo Pro 229 EC145 POLIZEI No. NE3524RTB FTR RTB Solo Pro 229 EC145 Black FTR No. NE3525RTB RTB 4-blade helicopter with detailed scale canopy With a rotor diameter of almost 40 cm, the latest scale variant of the EC 145, known as the Solo Pro 229, is a genuine eyecatcher. Numerous external fittings and small parts attached to the finely detailed injection-moulded plastic fuselage complete the outstanding scale impression of the Nine Eagles EC 145.
42
Blue Arrow Starter RTF obust co-axial helicopter for R beginners, in a comprehensive set with transport case The Blue Arrow Starter is a co-axial helicopter which is specifically designed for the complete beginner to model helicopter flying. It combines robust, low-maintenance mechanics, with the look of the robbe Blue Arrow series, with comprehensive set contents designed with the beginner in mind.
44
Blue Arrow XL 490 lue Arrow XL 490 – the B beginner‘s helicopter with XL presence! The robbe Blue Arrow XL 490 is an unusually large co-axial model helicopter for beginners. It offers the same extremely stable flying characteristics as a smaller beginner‘s helicopter, but with a length of 680 mm and a rotor diameter of 490 mm it has the appearance of a „full-size“ machine. This makes it possible for the beginner to move directly from the Blue Arrow XL 490 to a 450-class helicopter.
46
Arrow Plus Trainer Black Bullet S-FHSSNo. S2538 Ideal single-rotor practice helicopter for advanced beginners, with LED lighting system. The robbe Arrow Plus Trainer Black Bullet is a perfect trainer helicopter for pilots moving up from a co-ax model to a singlerotor type. The cool „Black Bullet“ looks are emphasised by the LED lights fitted to the main rotor blades and tail stabiliser, providing impressive lighting effects when night-flying.
48
Blue Arrow Trainer CP S-FHSS RTB No. S2537 obust 3D trainer helicopter R with S-FHSS receiver and metalgeared servos The robbe Blue Arrow Trainer CP is an ideal3D trainer helicopter with collective pitch control. The model‘s ultra-robust mechanical system makes it a superb choice for pilots moving up to 3D helicopter flying.
50
Blue Arrow CP120 S-FHSS RTB 20-class 3D aerobatic heli1 copter with superb flying characteristics for the demanding 3D pilot. The Blue Arrow CP120 is a 120-class 3D aerobatic helicopter. Its outstandingly accurate 3D flying characteristics will satisfy even the most demanding 3D pilot. This makes it an excellent choice for pilots who have gained plenty of experience flying model helicopters with collective pitch control, and wish to take the bold step of trying 3D aerobatics.
52
Blue Arrow Q RTF eady-To-Fly multi-copter with R numerous GPS functions for perfect aerial photographs. The robbe Blue Arrow Q RTF is a Ready-ToFly multi-copter with advanced GPS stabilisation. The high-quality stabilisation system ensures a stable hover and a high level of inherent stability. This makes the Blue Arrow Q an excellent choice for aerial photography and inexperienced pilots. The optional camera mount, S2541017, can be used as a simple means of installing a GoPro® camera..
Fully licensed by Red Bull® GmbH - Austria 54
BO-105 Red Bull SR FTR RTF ingle-rotor helicopter with S detailed scale fuselage The BO-105 Red Bull SR FTR RTF is a compact model of the well-known BO-105 multi-role helicopter with an excellent scale appearance. The plastic scale fuselage is particularly well detailed, ensuring that the model looks very realistic in the air. A magnetic cabin latch ensures fast, easy battery swaps. The single-rotor design is ideal for the advanced beginner, and offers extremely stable flying characteristics.
Fully licensed by Red Bull® GmbH - Austria 56
BO-105 Red Bull CP FTR RTF our-blade helicopter with F detailed scale fuselage The BO-105 Red Bull CP FTR RTF is a compact model of the well-known BO-105 multi-role helicopter with an excellent scale appearance. The plastic scale fuselage is particularly well detailed, ensuring that the model looks very realistic in the air. The CP version is fitted with a sophisticated and convincing four-blade rotor head with collective pitch which underlines its scale aspirations.
Fully licensed by Red Bull® GmbH - Austria 58
Cobra V2 Red Bull RTF 2.4 GHz inely detailed scale model F helicopter of the famed RED BULL machine. The full-size The Cobra has ranked as one of the stars of the RED BULL Flying Bulls fleet since 2005. Prior to this, the ex-US Army attack helicopter with its top speed of 350 km/hr had a distinguished past. It starred in many American cinema films and TV series. The model Experience the real feeling of piloting this machine - in model form.
60 The illustration shows the model assembled. The canopy design can differ from the illustrations.
T-REX 150 DFC Combo BTF robbe No. RH15E02X he T-REX 150 - 3D machine T with the exclusive robbe look! Enter the new world of mini 3D helicopters with the exclusive robbe version of the T-REX 150! Never has there been a model helicopter of this size which displayed such an impressive performance in the air. The T-Rex 150 DFC is now capable of flight manoeuvres which were previously the preserve of its bigger brothers.
62 The illustration shows the model assembled. The canopy design can differ from the illustrations.
T-REX 150 DFC Combo BTF mall super-sport model with S superb performance! When you see the T-REX 150 Super Combo DFC fly for the first time, you won‘t be able to believe your eyes! Never has there been a model helicopter of this size which displayed such an impressive performance in the air. The T-Rex 150 DFC is now capable of flight manoeuvres which were previously the preserve of its bigger brothers.
64 The illustration shows the model assembled. The canopy design can differ from the illustrations.
T-REX 450L Dominator Super Combo 6S T-REX 450L Dominator Super No. RH45E10X Combo 6S T-REX 450L Dominator Super No. RH45E13X Combo 3S T-REX 450L Dominator – A completely new Dominator concept! The T-Rex 450L Dominator is not only larger than its stable-mate, but is based on a completely new chassis design. And it‘s not just the chassis that is completely new: the power train has also been updated for a 6S battery, ensuring that the model fully lives up to its Dominator label.
66 The illustration shows the model assembled. The canopy design can differ from the illustrations.
T-REX 550E PRO DFC Super Combo T-REX 550E PRO DFC Super No. RH55E06X Combo T-REX 550E PRO DFC Combo No. RH55E07X Face-lift version of the popular T-Rex 550 Pro DFC, with more powerful motor Set contents No.
68 The illustration shows the model assembled. The canopy design can differ from the illustrations.
T-REX 600E PRO DFC Super Combo T-REX 600E PRO DFC Super No. RH60E01A Combo T-REX 600E PRO DFC Combo No. RH60E02A T-REX 600E PRO with new high-power motor for even more flying fun The T-Rex 600E PRO DFC has had a power make-over. The new 750MX motor delivers incredible power and performance to your helicopter.
70 The illustration shows the model assembled. The canopy design can differ from the illustrations.
T-REX 800E PRO DFC Super Combo No. RH80E03X -REX 800E PRO DFC – The T new PRO version of the largest T-REX! We proudly present the new PRO DFC version of the robbe / Align T-REX 800E in a completely revised form and with a new ‚look‘. In Super Combo form this giant machine offers everything the chopper enthusiast could desire. In addition to the popular Align 3GX flybarless system this helicopter is equipped with a completely new package of electronic components.
The Home menu is used to display the travels for transmitter controls 1 ... 4, the trims and the essential telemetry data. Set contents 1 Megatech T4PLS 2.4 GHz T-FHSS® transmitter 1 R304SB 2.4 GHz T-FHSS® receiver 1 standard switch harness 1 mini-screwdriver Set contents • 1 Megatech T4PLS 2.
T4PLS-R304SB 2.4 GHz T-FHSS® T4PLS-R304SB 2.4 GHz TFHSS® No. F3039 T4PLS-R304SB-R2104GF 2.4 No. F3038 GHz Everything in hand! - Fully expanded four-channel pistolgrip transmitter with top-class performance and integrated telemetry function, exploiting 2.4 GHz FHSS technology. The T4PLS exploits Futaba FHSS frequency hopping technology to provide optimum transmission security and a direct, ultraprecise sensation of control.
Switches and buttons for adjustments and switching processes are housed in the pistol grip for ease of access. Trim buttons positioned on the steering wheel dome for ease of access. Perfectly positioned, backlit graphical screen, easily legible. All the telemetry data are displayed in clear form in the Home 2 menu. 74 The transmitter provides convenient brake mixers, both for separate front and rear wheel brakes, and also for rear-wheel and separate front-wheel brake.
T4PLS-R304SB 2.
76
T10J-R3008SB 2,4 GHz T-FHSS® Fully expanded ten-channel hand-held transmitter with integral telemetry function, exploiting 2.4 GHz T-FHSS® frequency-hopping technology. The ideal system for advanced pilots who wish to control fixed-wing model aircraft, helicopters and multi-copters, and appreciate the sensation of accurate control. With its extremely comprehensive range of functions, the T10J can cope effortlessly with very demanding applications.
Integral patch aerial provides even, all-round transmission pattern without directional effect. Slim hand-held transmitter with integral hand-grips for a secure hand-hold when launching gliders. Telemetry menu for setting, selecting and displaying a maximum of 32 telemetry channels. 78 The switches are perfectly positioned, and can easily be operated without releasing the sticks. High-quality dual-axis stick units of the open-stick type ensure accurate, fine control.
T10J-R3008SB 2,4 GHz T-FHSS® Transmission • 10 (8+2) channels • Can be switched from T-FHSS® (10-channel) to S-FHSS (8-channel) modulation. • T-FHSS® frequency-hopping technology with integral telemetry • Broad channel spread is responsible for good interference rejection and ultra-fast response, giving a sensation of direct, accurate control.
The centre of the transmitter houses the accurately balanced neckstrap lug, beeper and on-off switch. Centrally positioned rotary knob and freely assignable digital push-button. An optional earphone is used for speech output of telemetry data. Alternatively an optional active loudspeaker can be connected for speech output. S.BUS socket for setting the S.BUS channel number and / or programming the servo parameters. Easily accessible controls.
T10J-R3008SB 2,4 GHz T-FHSS® • Future-proof digital technology for all future Futaba components • S.BUS components can be programmed and registered directly at the transmitter • Serial digital signal, ideal for flybarless systems, gyros and battery backers Functions - General • 30 internal model memories • Model memory transfer by radio between two T10J transmitters, or from T8J to T10J.
82
FX22+R7008SB 2,4 GHz FASSTest® ully expanded 14-channel F console transmitter with highclass performance and integral telemetry function. The FASSTest® transmission technology of the robbe Futaba FX-22 guarantees superior transmission security and a direct, ultraprecise sensation of control. Combine all this with a comprehensive array of functions which leaves little to chance, and the usual high Futaba quality, and the FX-22 is the perfect console transmitter for all demanding pilots.
Switches, controllers and linear sliders in easily accessible positions; can be assigned to any functions. The linear sliders are a practical method of controlling auxiliary functions. Side compartment for Trainer and charge sockets, also SD card slot for memory expansion, 32 MB...2 GB (3916 models). The transmitter software can also be updated using the SD card, making it a simple matter to keep the transmitter abreast of current developments.
FX22+R7008SB 2,4 GHz FASSTest® • Extremely fast and reliable automatic re-binding even under difficult conditions • Intelligent servo timing for simultaneous servo movement, prevents differential servo response • Dual-aerial diversity – lightning-fast switching between two receiver aerials for optimum reception signal quality (depending on receiver) • Pre-Vision – FASST / FASSTest® receivers constantly scan the input signal and apply intelligent Futaba error correction.
Telemetry data display Expo or Dual Rate curve settings Variable servo transit speed Large stopwatch display S.BUS technology • Digital BUS technology for modelling applications • Pioneering serial control bus • Fully digital incorporation of S-BUS components such as S.BUS servos, S. BUS speed controllers and S.BUS sensors • S.BUS1 and S.
FX22+R7008SB 2,4 GHz FASSTest® The Futaba File System Utility V3 can be used to convert the data into a CSV file, and then read out using a PC. Programs such as Excel can be used to display the control signal and sensor data in tabular or graphic form. Wireless Trainer function with S.BUS receivers. This function enables any robbe-Futaba S. BUS receiver to be used as a „wireless Trainer system“, whether it is an S-FHSS, FASST or FASSTest® receiver. Of course, the S.
The digital interface safe - fast - reliable Totally digital Ultra-fast Unrestricted programming Battery de-coupled from the receiver Optimised wiring Reduced weight / volume Flexible arrangement 88 Change your thinking completely The robbe / Futaba S.BUS system revolutionises RC modelling, and offers unprecedented new facilities. The new digital S.
S.BUS S.BUS receiver S.BUS servo Speed controller Battery Flybarless gyro Gyro Battery backer Sensor PWM adapter Standard servo What does the term ‚S.BUS‘ mean? A bus is a system for transferring data between multiple participants using a common channel. The robbe / Futaba S.BUS system is a digital bus which exchanges all the data such as control commands and telemetry information - between the various components by means of a single cable. This central S.
S.BUS Disconnect the power supply from the receiver In a conventional hub / spoke wiring arrangement with the receiver as the hub, all energy for the system passes through the receiver. Supplying power to the components via the receiver places restrictions on the positioning of those components, and always involves some level of compromise. The robbe / Futaba S.BUS heralds a new era in this respect: the S.BUS supplies energy to all components directly, and the battery can be connected to the S.
S.BUS Optimise your wiring Until now, models with multiple wing-mounted Conventional servos were characterised by extremely complex wiring arrangements. The S.BUS changes all that. solution Individual cables from each servo to the receiver are eliminated, and instead the servos are connected to the S.BUS at any convenient point. As a result, wings fitted with several servos can be connected in a moment - using a single wing S.BUS wing connector connector - when the model is rigged at the flying field.
S.BUS Save space and weight Whether your model is a fixed-wing aircraft, helicopter, boat or car: the lighter it is, the better it flies or runs. If you prefer models with slim fuselages and compact bodywork, you will be delighted at the space saved by the S.BUS. The revolutionary S.BUS technology offers both advantages: it reduces weight and also creates more space. On the one hand this is due to the greatly simplified wiring, on the other by more compact components. Current S.
S.BUS Maximum speed / maximum reliability For consistent control of the model it is vital that the system should execute every control command as quickly and accurately as possible. robbe / Futaba pilots using the S.BUS system can rely on ultra-fast data transfer which takes a maximum of three milli-seconds. That means: up to 333 data packets are passed on by the receiver every second, guaranteeing perfect handling of your model, even if it is a very high-speed type.
RC accessories S.BUS trainer lead No. F1263 S.BUS trainer lead. This lead can be used to convert any S.BUS receiver - whether S-FHSS, FASST or FASSTest® - into a wireless Trainer system. Of course, the S.BUS receiver to be used must operate on the same modulation as the Pupil transmitter, and must be bound to it. Power is supplied via the lead from the Trainer socket. All other settings are entered in the Trainer menu at the Teacher transmitter in the usual way.
RC accessories ZH-ZH servo patch lead, 3-pole, Servo mounting frame, S3150 No. F1819400 BB pack of 2 No. 8889 400 ZH-ZH servo patch lead, 3-pole, No. F1819500 Practical servo mounting frame with 500 output shaft bracing ballrace for 11 mm ZH-ZH servo patch lead, 3-pole, wing servos. No. F1819600 The practical method of mounting servos in 600 the wings. The servo frame adds no height: Plug-in Futaba-ZH lead for SVi servos. 0.14 mm².
RC accessories Rudder upgrade kit for the whole robbe Nano-Racer series No. 2600 Nano-racers without a rudder - that was yesterday! The rudder upgrade kit for your Nano-Racer provides a quick and easy method of fitting a working rudder. The extra function enormously increases your model‘s fun factor. Knife-edge flight, slow rolls and stall turns are easy to accomplish, as are all other manoeuvres which require a rudder.
RC accessories Aluminium servo output lever No. 8991 round 180° 49mm Aluminium servo output disc, 180°, 49 mm Specification: 49 mm Overall disc diameter: Number of linkage holes: 6, 3 per side Distance, servo screw to first hole: 12 mm Hole spacing: 4 mm Weight incl. 3 mm socket-head screw: approx. 9 g Set contents: 1 x Servo output disc 1 x Socket-head screw, 3 x 8 mm Aluminium servo output lever The new range of robbe aluminium servo output levers comprises seven different devices.
RC accessories Aluminium servo output lever, double-arm, 49 mm (25-tooth) No. 89922000 Aluminium servo output lever, double-arm, 86 mm (25-tooth) No. 89932000 Aluminium servo output lever, doublearm, 49 mm Specification: Overall lever length: 49 mm Number of linkage holes: 6; 3 per side Distance, servo screw to first hole: 12 mm Hole spacing: 4 mm Weight incl. 3 mm socket-head screw: approx.
Telemetry sensors BL-RPM-Sensor No. 8166 SBS-01V voltage sensor Replacement RPM sensor No. F1735 SBS01RM / CGY750 No. F1732100 BL motor rpm sensor for the CGY750/E Voltage sensor, 0..100 V-DC. Voltage sensor for the Futaba S.BUS2 telemetry system. Can be used with T18MZ, FX-32, T14SG and T4PLS transmitters. Equally suitable for fixed-wing model aircraft, helicopters, boats and cars. Including 50 cm connecting lead and 1 A fuse. Measurement ranges: External: 0...100 V DC Internal: 3.7...8.
Telemetry sensors True Airspeed Sensor 450 No. F1677 Measure the exact speed. The robbeFutaba True Airspeed Sensor 450 for the S.BUS system provides an exact measurement of the model‘s speed through the air by accurately monitoring the dynamic and ambient air pressure. The dynamic air pressure (caused by the model‘s airspeed) is measured by what is known as a Prandtl tube, and the differential pressure is measured by additional annular jets.
Receiver Receiver R304SB 2.4 GHz Receiver R3008SB 2.4 GHz No. F1022 T-FHSS® No. F1027 T-FHSS® Small, lightweight 2.4 GHz T-FHSS® four-channel receiver with telemetry transmitter, incorporating Frequency Hopping technology. Four-channel T-FHSS® receiver with four sockets for normal servos and speed controllers. With supplementary S.BUS2 output for connecting S.BUS2 devices such as servos and telemetry sensors.
HV-S.BUS-Servos Servo S3173SVi No. F1819 10.8 mm - 43 Ncm - 0.12 sec - BB - MG - HV - S.BUS2 HV-S.BUS2 variant of the proven S3150 digital servo. New - even faster and more powerful. With plug-in connecting lead. A new type of motor makes the servo more powerful and about 30% faster. The set-up has been selected in such a way that it can be operated directly with 2S LiPo batteries as well as with conventional 5.7 ... 6 V BEC systems. At 0.15 sec.
HV-S.BUS-Servos Servo S3270SVi No. F1825 11.8 mm - 30 Ncm - 0.08 sec - BB - MG - HV - S.BUS2 New, powerful 12 mm servo with metal gears and aluminium central case section. The S3270SV is an HV S.BUS2 servo with metal gears and aluminium central case section. High output torque of 30 Ncm, and very fast at 0.08 sec/45°. The motor set-up has been selected in such a way that it can be operated in LV mode (5.7 ... 6 V BEC) with ample power and speed, as well as HV mode, i.e.
HV-S.BUS-Servos BLS671SVi servo No. F1814 15 mm - 83 Ncm - 0.08 sec - BB - MG - HV - S.BUS2 - BL Powerful and very fast steering servo for 1:12 model cars with brushless motor and HV, plus plug-in lead at the servo. This servo is only 15 mm „thick“, but generates the enormous output torque of 62 Ncm. The ideal steering servo for competition RC model cars. For direct operation with 2S LiPo batteries. HV S.BUS2 version of the BLS651 LV servo. Programmable BLS671SV servo 15 mm - 83 Ncm - 0.
HV-S.BUS-Servos S3073SV servo No. F1807 20 mm - 39 Ncm - 0.12 sec - BB - HV - S.BUS High-voltage S.BUS version of the proven, all-purpose S3151 servo. An all-purpose servo for many applications in the whole of modelling, including simple glow-powered helicopters. The output shaft is supported in one ballrace and a special double bush. Wireless assembly technology for particularly good vibration resistance. Direct operation with 2S LiPo batteries.
HV-S.BUS-Servos Servo S9370SV No. F1824 20 mm - 168 Ncm - 0.08 sec - BB - MG - HV - S.BUS2 Programmable High Voltage / S.BUS car servo, with metal gears and aluminium case centre section. Car servo with the high torque of 160 Ncm, with twin-ballraced metal gearbox. For HV application, i.e. up to 2S LiPo battery. With S.BUS2 socket, therefore can also be connected to normal receivers. Programmable from the transmitter or a PC. A special potentiometer ensures positional accuracy and reliable centring.
LV-S.BUS-Servos Of course, all S.BUS servos can also be connected to conventional receivers with PWM modulation. The servos can be addressed in various ways: 1. Via the S.BUS receiver 2. Using the compact SBC-1 programmer No. F1696 3. Using PC-Link software, for which the CIU-2 USB adapter, No. F1405, is required. 4. At the S.BUS socket of new transmitters such as the T10J, T14SG, T18MZ, FX-32, FX-22 etc. Servo BLS251SB No. F1822 20 mm - 47 Ncm - 0.04 sec - BB - MG - S.
Gyros • Additional supported bus systems: Spektrum DSM2 / DSMX, HoTT, M-Link and Jeti • Robust aluminium case Powerbox iGyro inkl. GPS No. 6700 PowerBox iGyro ohne GPS No. 6701 stabilisation in all speed ranges, and effectively prevents over-controlling and oscillation at high speed. Menu-based operation on the graphic OLED screen makes all adjustment work quicker. The digital PowerBox triple-axis gyro system incl.
Electronic accessories PowerBox Evolution No. 6706 The smallest and lightest high-capacity power supply with linear regulated voltage for receiver and servos! Specification: • Double linear-stabilised voltage of 5.90 Volt for receiver and servos • Current capacity max. 2 x 10 Ampere • For 7.
Electronic accessories PowerBox Champion SRS No. 6708 Robbe/Futaba S-Bus diversity receiver backer for connecting 24 PWM servos and Robbe/Futaba S-Bus servos to the Robbe/ Futaba S-Bus! New functions: • Independent outputs for : 2 x aileron; 2 x elevator; 2 x rudder • Door sequencer: 6 x freely programmable outputs, with set-up assistant • robbe/Futaba S.
Electronic accessories PowerBox Royal SRS ohne GPS No. 6710 Robbe/Futaba S-Bus diversity receiver backer for connecting 24 PWM servos and Robbe/Futaba S-Bus servos to the Robbe/ Futaba S-Bus, including triple-axis gyros without GPS! New functions: • Integral iGyro: triple-axis gyro system with Heading function and set-up assistant without GPS • Independent outputs for : 2 x aileron; 2 x elevator; 2 x rudder • Door sequencer: 6 x freely programmable outputs, with set-up assistant • robbe/Futaba S.
Electronic accessories PowerBox Digi Switch (MPX-Anschluss) No. 6704 PowerBox Spark Switch 5,9V The smallest electronic switch system / linear regulator combination for modelling! This innovative product is the world‘s first multi-function switching system, developed and produced by PowerBox Systems GmbH especially for use with modern, lightweight Lithium-Polymer cells. It provides a substantial increase in electronic security for the receiver power supply.
Electronic accessories PowerBox Spark Switch 7,4V No. 6703 PowerBox Systems ignition switch - 7.4 V! The SparkSwitch is a reliable, high-performance ignition switch. The whole construction of the SparkSwitch was deliberately kept simple, but without omitting important functions. The ignition switch requires no adjustments, and is immediately ready for use. The only requirement is to assign the switch at the transmitter. Specification: • Input voltage 4.0 - 9.0 V • Regulated output voltage 7.
Electronic accessories PowerBox Sensor (UNI-Anschluss) No. 6712 The electronic switch backer: genuine double security! The PowerBox Sensor is the world‘s first and smallest battery backer compatible with NC and LiPo batteries. It is equipped with two linear regulators, two electronic switches and genuine double security, and thousands of them have been produced and appreciated since 2004. The unit now also features dual voltage monitoring and a minimum voltage memory. Specification: • Output max. 5.
Electronic accessories PowerBox Sensor 7.4 V (UNI connector) No. 6714 EXCLUSIVE to robbe Modellsport: The electronic HV (7.4 V) switch backer: genuine double security! The PowerBox Sensor is the world‘s first and smallest battery backer compatible with NC and LiPo batteries. It is equipped with two linear regulators, two electronic switches and genuine double security, and thousands of them have been produced and appreciated since 2004.
Electronic accessories PowerBox Digi Switch 7.4 V (MPX connector) PowerBox Digi Switch 7.4 V (UNI connector) No. 6717 No. 6716 EXCLUSIVE to robbe Modellsport: The smallest electronic switch system combined with linear voltage regulator for modelling - HV (7.4 V)! This innovative product is the world‘s first multi-function switching system, developed and produced by PowerBox Systems GmbH especially for use with modern, lightweight Lithium-Polymer cells.
Receiver batteries LiPo-Akku ROXXY® Evo 2-3200 LiPo-Akku ROXXY® Evo 2-4000 LiPo-Akku ROXXY® Evo 2-2600 No. 6976 20C No. 6977 No. 6975 20C 20C et contents S BID chip, EHR balancer connector et contents S BID chip, EHR balancer connector et contents S BID chip, EHR balancer connector Specification: Charge current max. 6 A Load current 6A Load current, peak: 12 A Dimensions L x W x H: 113 x 34 x 18 mm 160 g Weight approx. Capacity 2600 mAh 7.
Switches and controllers ROXXY® BL Control 712 BEC No. 8971 ROXXY® BL Control 722 BEC No. 8972 Compact, programmable ROXXY®BL controller for 12 A load current, weighs just 9 g. New version of the proven ROXXY® BL-Control for brushless outrunner motors, designed for 6...10 NC / NiMH or 2..3 LiPo cells. Now with extra capacity of 12 A. The clock frequency is 10,000 Hz, guaranteeing ultra-fine motor speed control, which offers particular advantages in „torque-roll“ manoeuvres.
Switches and controllers ROXXY® BL-Control 745 BEC No. 8973 Compact, programmable ROXXY®BL controller for 45 A load current. New version of the proven ROXXY® BL-Control for brushless outrunner motors, designed for 6...10 NC / NiMH or 2..3 LiPo cells. Now with extra capacity of 45 A. The clock frequency is 10,000 Hz, guaranteeing ultra-fine motor speed control, which offers particular advantages in „torque-roll“ manoeuvres. The brake is programmable, and can be switched on and off.
Switches and controllers ROXXY® Smart Control – the intelligent speed controller The new ROXXY® Smart Control BL speed controller series offers an integral telemetry function via the digital S.BUS2 interface. In this way the ROXXY® Smart Control keeps you constantly informed about the current state of your power system: current, battery capacity, rotational speed, voltage and temperature are monitored, and the data are passed to the pilot.
Switches and controllers ROXXY® Smart Control 960-6 SV ROXXY® Smart Control 9100-6 ROXXY® Smart Program Card No. 8574 SV No. 8575 Deutsch No. 85731000 ® ROXXY Smart Program Card The ROXXY® Smart Control 960-6SV is a The ROXXY® Smart Control 9100-6SV is a No. 85732000 Englisch speed controller for model aircraft with speed controller for model aircraft with 2…6S flight batteries and 60 A continuous 2…6S flight batteries and 100 A continuous load current.
Power supplies Mains PSU 300W 20A No. 8143 Compact, high-performance 300 Watt mains PSU, with uservariable output voltage and digital display of voltage and current. The input voltage range is 100…240 V, and the mains lead plugs into the unit, making it extremely versatile. The output voltage can be adjusted within the range 8….15 Volt DC, and the maximum current is 20 A. The unit‘s total continuous power is 300 Watt.
Power supplies Side view: temperature-controlled cooling fan, plug-in mains lead and integral mains switch. Mains PSU 1200 Watt 50A No. 8136 Powerful 1200 Watt mains PSU, with user-variable output voltage and digital display of voltage and current. The input voltage range is 100…240 V, and the mains lead plugs into the unit, making it extremely versatile. The output voltage can be adjusted within the range 15….30 Volt DC, and the maximum current is 50 A.
124
POWER PEAK® D7 EQ-BID 12V / 230V No. 8129 igh-performance 400 W charH ging / discharging station for the demanding modeller. Two outputs, each with 200 Watt power and up to 20 A charge current, in a single case. The Power charger which can recharge your LiPo batteries on the move and at home and very quickly. Both charge circuits work entirely separately of each other, and can also be adjusted individually. The charge data for all outputs are displayed in clear form on separate backlit graphic screens.
Charge parameter set-up display. Battery to be charged: 4S 3600 mAh, = 14,8 Volt, 3,7 A Safety cut-off timer settings for switching off after 120 minutes. Typical method of connecting a LiPo battery. Select menu for the Charge / Discharge process. Temperature-controlled cooling fan. Plug-in 230 V mains lead with On / Off switch attached to integral 400 W AC mains PSU. Working displaying showing the charge process Mini-USB socket for updating battery chargers by the user.
No. 8129 Data display: charge voltage curve Data display: list of charged-in and discharged capacities in Cycle mode Functions: Input: 10.5…18 V DC (user-variable low voltage alarm, 11…12 V) or 100…240 V AC (plug-in lead with On / Off switch) • 2 x 0.1…20 A charge current (max. 200 W per output - 12 V or 230 V) • 2 x 0.1…10 A discharge current (max.
Rechargeable batteries LiPo ROXXY® Evo batteries Robbe ROXXY® EVO LiPo batteries – more power, more capacity! The proven robbe ROXXY® high-performance LiPo batteries are now available in a new, revised EVO version. The ROXXY® EVO range of batteries offers crucial improvements in all aspects of performance. Although previous ROXXY® LiPo packs had an above-average voltage curve even when delivering severe load currents, the voltage curve of the new ROXXY® EVO series provides a perceptible increase in „push“.
Rechargeable batteries Overview robbe Lipo-batteries ROXXY® Evo Dimensions in mm No.
Rechargeable batteries Overview robbe Lipo-batteries ROXXY® Evo Dimensions in mm No.
Electronic accessories 6 A servo connector with 3 x 0.5 6 A servo socket, 3 x 0.5 mm² XT60 charge lead, 30 cm long, No. 8905 50 cm No. 8906 1mm² No. 85673000 mm² 50 cm High-current servo plug with 0.5 mm² silicone cable about 50 cm long, for making up servo / S.BUS connections. Maximum current capacity 6 A continuous, 12 A peak. High-current servo socket with 0.5 mm² silicone cable about 50 cm long, for making up servo / S.BUS connections. Maximum current capacity 6 A continuous, 12 A peak.
Electronic accessories Special lightweight servo cable for modelling. The flexible cable is insulated using a special extremely thin-walled plastic, making the material very light in weight. The surface is smooth, glossy and slippery, making the cable easy to deploy and thread through other components. The insulation is temperature-resistant to 100°C, and is self-extinguishing. Ideal for servo wiring arrangements in small to mediumsized models where weight-saving is important - whether with or without an S.
Electronic accessories Servo extension lead, Futaba 6 No. 89880020 A Servo extensions lead, Futaba No. 89880040 6A Servo extensions lead, Futaba No. 89880100 6A Servo extensions lead, Futaba No. 89880150 6A Ready-made servo extension lead with Futaba 6 A connector and special lightweight servo cable. Specially developed for modelling applications. Current rating 6 A continuous (peak 12 A) Dimensions: Positive and negative conductors: 0.5 mm² Signal conductor: 0.14 mm² Colours: black, white, red 12.
Electronic accessories Futaba 6 A plug with 50 cm lead No. 89980050 Futaba 6 A plug with 100 cm No. 89980100 lead Futaba 6 A socket with 50 cm No. 89990050 lead Futaba 6 A socket with 100 cm No. 89990100 lead Multi-plug + socket, 30 A (1 No. 8979 pair) Multi socket VE 10 No. 89791000 Multi plug VE10 No.
135
136
We accept no liability for damage and consequent damage arising from the use of products from our range, as we have no control over the way they are installed, used and operated. We reserve the right to alter the specification of any item illustrated or listed in our catalogues. We accept no liability for printing errors. Texts, drawings and illustrations may not be reproduced in whole or in part, in any form, without our prior express written approval.
Token fee: 2,00 € No. 97142010 robbe Modellsport GmbH & Co. KG - Postfach 1108 - D-36352 Grebenhain Phone +49 (0) 6644/87-0 - Fax +49 (0) 6644/7412 - www.robbe.
