Operating instructions

Electronic accessories
Futaba 6 A plug with 50 cm lead
No. 89980050
Futaba 6 A plug with 100 cm
lead
No. 89980100
Ready-made Futaba 6 A plug with special
lightweight servo cable
Specially developed for plug-in connections
in servo power supply systems or for
wing-mounted servos in small to medium-
sized model aircraft. With a maximum
continuous current capacity of 6 A (peak 12
A) this connector is adequate for the
requirements of about 70% of models. Can
be used for conventional (star-formation)
wiring systems as well as digital S.BUS
systems.
Dimensions:
Positive and negative conductors: 0.5 mm²
Signal conductor: 0.14 mm²
Colours: black, white, red
Load current:
Continuous: 6 A
Peak: 12 A
Futaba 6 A socket with 50 cm
lead
No. 89990050
Futaba 6 A socket with 100 cm
lead
No. 89990100
Ready-made Futaba 6 A socket with
special lightweight servo cable
Specially developed for plug-in connections
in servo power supply systems or for
wing-mounted servos in small to medium-
sized model aircraft. With a maximum
continuous current capacity of 6 A (peak 12
A) this connector is adequate for the
requirements of about 70% of models. Can
be used for conventional (star-formation)
wiring systems as well as digital S.BUS
systems.
Dimensions:
Positive and negative conductors: 0.5 mm²
Signal conductor: 0.14 mm²
Colours: black, white, red
Load current:
Continuous: 6 A
Peak: 12 A
Multi-plug + socket, 30 A (1
pair)
No. 8979
Multi socket VE 10 No. 89791000
Multi plug VE10 No. 89792000
Multi-plug and socket
All-purpose six-pin connector. Typical use:
wing servo connector for up to four servos
(positive, negative and 4 x signal), or as
high-current connector: 2 x 3 pins in parallel,
max. 30 A load current. Each socket contact
features one double tongue.
Multi-connector holder, pack of
2
No. 89793000
Multi-connector holder for installing in
the fuselage or wing root. For use as
wing servo connector, power supply,
charge socket.
Contents, excl. multi-connector
134