Operating instructions

Blue Arrow Starter RTF
Robust co-axial helicopter for
beginners, in a comprehensive
set with transport case
The Blue Arrow Starter is a co-axial
helicopter which is specifically designed for
the complete beginner to model helicopter
ying. It combines robust, low-maintenance
mechanics, with the look of the robbe Blue
Arrow series, with comprehensive set
contents designed with the beginner in mind.
The ideal first model with four-channel
control
The Blue Arrow Starter‘s extreme inherent
stability and superb ying characteristics
make it easy for the complete beginner to
learn the basic skills of model helicopter
ying with a fully featured four-channel
system: „pitch-axis“, „roll“, „yaw“ and „climb /
descent“. Since the model is so stable, most
piloting errors do not end in disaster. Its low
weight and strong design minimise the need
for replacement parts - even after a „hard
landing“. The facility to switch the radio
control system from „docile“ to „agile“
provides additional support to the beginner
during those rst few ights.
High-quality set contents
The Blue Arrow Starter set‘s comprehensive
contents leave nothing to chance. The
high-quality 2.4 GHz radio control system
can easily be converted from Mode 1 to
Mode 2, and features two control settings as
a further aid to the beginner. Instead of the
usual single ight battery, the model is
supplied with two packs to enable the new
pilot to indulge in extended practice
sessions. Swift charging is ensured by the
double-output charger and 230 V mains
PSU, which is capable of charging both ight
batteries simultaneously. The complete set
is rounded off by a screwdriver and a set of
dry cells for the transmitter. Everything
packaged in a padded transport case.
Set contents
• Robust co-axial helicopter specially
designed for beginners
• Model is fully assembled and set up, ready
to y
• LED-illuminated canopy with the robbe
Blue Arrow look
• 2 x LiPo ight battery, 3.7 V / 110 mAh
• Double battery charger with 230 V
plug-type mains PSU
• 2.4 GHz LCD transmitter set to Mode 2,
can be converted to Mode 1
• 4 x dry cells for transmitter
• High-quality transport case with foam
inserts for safe transport of model,
transmitter and accessories
• Operating instruction in German
(instructions in various foreign languages
can be downloaded from: www.robbe.com)
No. S2539
Specification:
Main rotor diameter approx. 190 mm
Length approx. 210 mm
All-up weight approx. 30 g
RC functions
Pitch-axis, Roll-axis, Yaw, Climb/descent
A complete list of recommended
accessories is included in the technical
documentation supplied with the model.
43