Operating instructions

• Extremely fast and reliable automatic
re-binding even under difficult conditions
• Intelligent servo timing for simultaneous
servo movement, prevents differential
servo response
• Dual-aerial diversity – lightning-fast
switching between two receiver aerials for
optimum reception signal quality (depen-
ding on receiver)
• Pre-Vision – FASST / FASSTest
®
receivers
constantly scan the input signal and apply
intelligent Futaba error correction.
• No loss of response speed even when the
frequency band is densely occupied
• Integral range-check function for checking
radio range before ying
• Modulation can be switched to FASST or
FHSS for backwards compatibility with
existing Futaba components
Telemetry
• Synchronised bi-directional communication
between transmitter and receiver with high
telemetry data rate (max. 9 times per
second)
• 32 telemetry channels
• Up to 1000 m telemetry range
• Real-time display of telemetry data on
integral screen
• Speech output via optional earphone with
3.5 mm barrel connector
• Speech output control via freely assignable
switches
• Melody and sound output (via internal
beeper or optional earphone)
• Vibration alarm
• Data recording of control signals (stick
movements) and telemetry data on SD
card in preparation
• PC analysis software for recorded
telemetry, GPS data and control signals in
preparation
• Receiver signal strength display for
monitoring radio range
• Range warning system (with optional GPS
sensor) for safe ying at the limits of vision
• Receiver low battery warning system for
monitoring the receiver battery
• Freely congurable output of telemetry
data via screen, sound, speech and
vibration
Ergonomics
• Precision sticks with 12-bit (4096-step)
resolution for extremely fine, accurate
control
• The „open-stick“ mechanisms of the
primary sticks are ballraced and virtually
devoid of lost motion
• Large 74 x 38.5 mm backlit screen (128 x
64 dots) with high contrast for excellent
legibility even in strong sunlight
• Graphic user interface and intuitive
Cap-Touch control wheel (with button lock)
for simple operation of all functions
• Nine languages available: German,
English, French, Italian, Spanish, Czech,
Russian, Japanese and Dutch
• Standardised, intuitive Futaba operating
system for simple change-over
• Freely assignable transmitter controls
• Freely selectable channel assignment
• Fully expanded with 18 controls: 6
switches, 2 rotary knobs, 2 linear sliders,
plus 2 optional stick switches and other
switches
• 2 linear sliders for practical control of
supplementary functions
• Freely selectable trims for all transmitter
controls (including switches etc.)
• Hardware reverse for all transmitter
controls and switches, unrestricted
selection of switching direction
• Direct model memory select in the Start
display for fast model selection
• Freely congurable User menu
• Rapid switching between telemetry and
Home / Timer display
• Congurable telemetry monitor menu (1
- 4)
• Mode 1 - 4 switchable
Trainer function
• Option of cable or radio module
• with individual function transfer (teacher
can transfer individual functions to the
pupil) and Mix-mode (teacher can override
all functions)
• Freely congurable Trainer channel
assignment
Recommended accessories
FX-30 CFRP transmitter tray 1x 8491
Aluminium transmitter case, robbe-Futaba
Aeroteam 1x 8899
T14SG LiPo battery, 2S 2800 mAh 1x 4618
FX-20, T8FG two-position stick switch
1x 8051
T12FG / FX-30 charge lead, 1.7 mm 1x 8260
FX-20, T8FG three-position stick switch
1x 8052
RC charger FX-30 230 / 12 V 2 A 1x 8501
FX-20, T8FG stick switch (push) 1x 8053
2.4 GHz wireless trainer system 1x F1414
FF-9 Trainer lead 1x F1591
FF-9 Trainer lead, DIN 6-pin 1x F1592
S.BUS trainer lead 1x F1263
FF-9 - FX trainer lead, 2.5 mm 1x 8236
FF-9 Trainer lead, F 3.5 1x 8238
FF-9 ight simulator adapter lead 1x 8239
Receiver battery charge lead, banana plugs
1x F1416
FX20-40 toggle switch, 2-position short
1x F1700
FX20-40 toggle switch, 2-position long
1x F1701
FX20-40 toggle switch, 3-position short
1x F1702
FX20-40 toggle switch, 3-position long
1x F1703
2-position momentary switch, short, T18M
1x F1802
Two-position momentary switch, long-
T18MZ 1x F1803
Vario and altimeter (TEK) 1x F1672
TEK compensation nozzle T 1x F1673
TEK compensation nozzle V 1x F1673V
GPS multi-sensor 1x F1675
Current sensor 150 A 1x F1678
Vario sensor 1x F1712
Temperature sensor, 125°C 1x F1713
SBS01T temperature sensor 200°C
1x F1730
SBS01RO RPM sensor, optical 1x F1731
SBS01RM RPM sensor, magnetic 1x F1732
SBS01A vario + altimeter sensor 1x F1733
SBS01G GPS + vario + altimeter sensor
1x F1734
SBS-01V voltage sensor 1x F1735
FX22+R7008SB 2,4 GHz FASSTest
®
No. F8079
85