Specifications

CitySource 96 (Single colour)
21
8. Wireless DMX operation
The wireless version of the CitySource 96 is equipped with the Lumen Radio CRMX module and antenna for
receiving DMX signal. CRMX module operates on the 2.4 GHz band.
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “r.InF“ (SPEC-->rAdI.--> r.InF.)
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “ r.UnL.“ (SPEC-->rAdI.--> r.UnL.).
9. Error and information messages
t.M.Er.(Temperature measuring error)
The message informs you that the LED module temperature sensor is defective.
MA.Er. (Master error)
The fixture is set as a master and DMX console is connected to the fixture.
10. Technical specifications
Power supply
• Electronic auto-ranging
• Input voltage: 100 - 240V AC, 50-60 Hz
• Fuse: T3.15 A H
• Power consumption (All LEDs at full):
Full mode: 200W (225VA)
Eco mode: 115 W (140VA)
Optic & Effects
• Light source: 96 Luxeon Rebel LEDs
• Optical system: 12° standard lens-array, 25° egg-crate module included;
45°and 32°x12°egg crate modules optionally available
• Fitting of additional frost foil filters
• RGBW colour mixing
• Adjustable strobe sequences
•Lumen maintenance:
Channels @
full intensity
Power
mode
L
70
All LED
channels
Full mode
Eco mode
60,000
70,000
L
70
= 70% maintenance of initial lumen output in hours
Control
• 4-digit LED display and four control buttons
• USITT DMX 512 (RDM support)
• DMX protocol modes: 4 (1, 2, 3, 5 control channels)
• Control: DMX 512, RDM support
• Operations modes: DMX, Stand-alone, Master/Slave