Specifications

32
Strobe 1 Error 1 (Strobe 1 Error 2 )
The messsages will appear after the reset of the dimmer/strobe module if the strobe lamella1 is not located in
the default position.
Strobe 2 Error 1 (Strobe 2 Error 2 )
The messsages will appear after the reset of the dimmer/strobe module if the strobe lamella 2 is not located
in the default position.
12. Technical specications
Electrical:
Power supply:.........................electronic auto-ranging
Input voltage range:...............100-240 V AC, 50/60 Hz
Live Fuse:...............................T 6.3 A@230V, T 10 A@120V
Neutral Fuse:..........................T 6.3 A@230V,T 10 A@120V
Power consumption:.........890 VA
Ballast:
Electronic
Lamp:
Approved model:Philips MSR Gold 700 FastFit ;750 hours
Base:PGJX 50
Optical System:
- High luminous-efciency glass reector
- Front Fresnel lens with diameter of 200 mm
Colour wheel:
-7 replaceable 'SLOT&LOCK' dichroic lters (including UV lter) + open
CMY colour mixing module
- Smooth CMY colour mixing system
- Colour temperature correction lter lowers the colour temperature from 6000K to 3200 K
- 30 colour macros
Strobe:
- Strobe effect with variable speed (max.15 ashes per second)
Dimmer:
- Smooth dimmer from 0 - 100 %
Effect:
- Rotatable beam shaper ,indexable 360° with continuous rotation
Zoom
- Linear motorized zoom
- Standard front Fresnel lens: 6°- 45°
- Front wide-angle lens (optional): 87°
Electronics:
-Control via graphic LCD display and ROBE navigation system
-Readout xture and lamp usage,receiving DMX values,temperature, etc
-Built-in analyzer for easy fault nding,error messages
-Remotely switching on/off the lamp
-Bilt-in demo sequences
-Black-out while head moving or color changing
-Silent cooling,
-Self-resetable thermo-fuse