Specifications
54
55
ground without any head movement.By means of items
Pan,Tilt,Zoom and Focus is possible to adjust moving head
to desired position.
Running program is possible to pause by pressing [ENTER] .
Editing Program --- Select this menu to edit or create the program.The DigitalSpot 5000 DT has 10 freely-
-programmable programs,each up to 99 steps.Each program step has a step time,during which effects last in
a current step.
Procedure:
1. Select the program you want to edit (“Program 1” - “Program 10”) and press [ENTER].
2. Select “Edit Steps” menu and press [ENTER].
3. Select the desired program step (“Step 01” - “Step 99”) and press [ENTER].
4. Select the desired item and press [ENTER].Now you can edit DMX value for selected item by [RNS] encoder
wheel
5. Press [ENTER] to save adjusted vallue.
6. Select another effects (channels and repeat steps 4 an 5.
7. Select “Save” or “Save and Copy” and press [Enter] to conrm all adjusted values in current step:
“Save” - saves the current prog. step
“Save and Copy” - saves and copiess the current prog. step to the next prog. step.
“Snap DMX”- inserts current values from DMX to all effects (channels).It is very useful function,you
don´t have to adjust all effects to desired positions,values are loaded from DMX.
8. Go on next prog. step ,press [ENTER] and repeat this procedure (steps 4 and 7).
After creation the program,you can simply reduced its length (by changing the start/end step) using the “Start
Step” and “End Step” menu.
16.7 Preview mode.
This item enables to display the image going from projector on the xture´s control display.
Note: If this function is called out ,the video sequence from projector will not be played continuously because
the xture´s processor has to display this sequence twice at the same time.
16.8 Reset functions
The DigitalSpot 5000 DT can be reset totally or by function modules.Select relevant function to run a reset:
Reset Pan/Tilt System --- This function resets pan and tilt.
Reset Zoom/Focus system --- This function resets zoom and focus modules.
Reset Iris System --- This function resets iris module.
Reset All systems --- This function enables the xture to index all effects and return to their standard posi-
tions.
16.9 Service menu
Use this menu to read useful information about the xture.
Lamp On Time --- Select this submenu to read the number of the operation hours with the lamp on.
Fixture Temperatures --- Select this submenu to read the temperatures of the projector :
Current - Select this function to read the current temperatures of the fixture interior .
Maximum nonresetable-The function shows the max.temperatures of the fixture interior
since the DigitalSpot 5000 DT has been fabricated.
Maximum resetable - The function shows the maximum temperatures of the xture interior
since the respective counter was last reset.In order to reset desired counter to 0,
press [ENTER] twice.
Measuring points of temperatures:
Projector temp.1 [°C]
Projector temp.2 [°C] temperatures measured in the data projector in the head
Projector temp.3 [°C]
Pan/Tilt Board[°C]...............temperature in the base of the xture
Air Filters --- Regular cleaning of the air lters is very important for the DigitalSpot 5000 DT life and perfor-
mance.Bildup of dust,dirt and fog uid residues reduces the xture´s light output and cooling ability.Tthe two
items of this menu help you to keep cleaning peeriod of the air lters.
Time To Cleanup Filters - The option allows you to read the time which remains to