Specifications

4.1 Video inputs

The VGA (8) and S-VIDEO (9) inputs provide direct connection to data projector.These inputs are allocated for

static presentation (standard using of the data projector) because data going through these inputs cannot be

processed in graphics engine ,it means that the most of graphics effects from DMX protocol are not active.In

this mode function Keystones from DMX protocol does not work.Nevertheless is possible to set keystones by

means of menu "Manual Control"(Manual Control ->Dataprojector Control and in this menu you have to select

Keystonning.After ending presentation is necessary to set Keystone into original state).

The S-VIDEO (13) and COMPOSITE (14) inputs enable to process data in graphics engine, it is means that

you can use all spectrum of effects that offer DMX protocol including digital Keystones.

Rear panel

1 - Power cord

2 - Power switch

3 - Fuse

4 - 5-pin DMX outputt

5 - 5-pin DMX input

6 - Ethernet input

7 - USB inputs

8 - 15-Pin VGA intput-dataprojec.

9 - S-video intput-dataprojector

10 - 3-pin DMX input

11 - 3-pin DMX output

12 - ATX switch

13 - S-video input- graphics engine

14 -Composite input-graphics engine

Front panel

1 - Display

2 - RNS control wheel

3 - Escape button

4 - Enter button

The head can be locked for transportation- the tilt lock button (5) is pushed and the pan lock/unlock lever (2)

is in lock position. To unlock the head, press the tilt unlock button (6) and move the pan lock/unlock lever to

unlock position.