Specifications

4.3 Fixture addressing

Projector addressing

Please note that the DMX CONTROL 24 PRO CT assigns the DMX-starting addresses every 6 steps. You have

to address every projector to the respective starting address. Otherwise, the channel assignment will not be

correct. All projectors with the same starting address work synchronically.

Projector Starting address Projector Starting address

Projector 1 1 Projector 3 13

Projector 2 7 Projector 4 19

4.4 Connection to the mains

Connect the fixture to the mains with the power-plug.

The occupation of the connection-cables is as follows:

Cable (EU) Cable (US) Pin International

Brown Black Live L

Light blue White Neutral N

Yellow/Green Green Earth

The earth has to be connected!

5. Operation

Preparation-adjusting mode

Press and hold the PROGRAM UP/DOWN-buttons for 5 seconds and switch on the POWER-switch at the same

time .The PROGRAM,STEP and TIME- button flashes.The PROGRAM-DISPLAY shows the current DMX channel

and the DMX VALUE-DISPLAY shows setting value for this channel. Now you can browse through the channels

by pressing PROGRAM UP/DOWN-button and check the function assignments(pan,tilt...) and effect

assignments(strobe,blackout...)to each channel.You can assign the channel to the desired button by pressing the

PAN, TILT, COLOR or GOBO-button. If you wish to assign the next 2 functions (gobo-rotation and shutter/strobe)

press and hold the COLOR or GOBO-button until the LED flashes. If you press the STROBE or BLACKOUT-

button( BLACKOUT-LED or STROBE-LED shines), the channel will be subject to the BLACKOUT- button or

STROBE- button in the standard mode.

NOTE:The STROBE/BLACKOUT buttons are assigned at the channel 6 as default.If you use the e.g. 4 -channels

fixture ,you must assign the strobe and blackout functions at the right channels and remove strobe/blackout

assigning at channel 6.

Default settings: suitable for the fixtures with 6 control channels (ClubScan 150/250 CT,ClubSpot 150/160

For fixtures with 4 control channels (strobe and blackout at channel 4)