Specifications

LiteWare HO
3
1.Introduction
LiteWare HO with wireless DMX is a stand-alone light source. The unit can be controlled by DMX
transmitted wirelessly and in stand-alone operation using 50 preset colours and 20 preset fade and
snap sequences.
Product features and specifications
• Full RGB with 16-bit dimming curve
• W-DMX (standard), and Lumen Radio (optional)
• Standard 14 hour runtime from fully charged battery (charging cycle 6 hours)
• 80 W RGB LED emitter
• Lumen output RGB 1650 lm in calibrated mode, personalities zero and one
• Lumen output RGB 1800 lm in un-calibrated mode, personalities two and three
• Lens beam angle options available 19, 24, 37 degrees when ordering as done at manufacture
• 50 preset colours, two-thirds Lee and Rosco colour swatch
• 20 preset colour snaps/fades
• Un-calibrated option for more user flexibility and higher output (see above)
• Six-channel control option with master fade and preset recall
• Finished in mirrored stainless steel to blend in with any surrounding
• Integral rugged aerial design
• IP45 – interior/exterior use
• Weatherproof design
• Available singularly or in flight cases with inbuilt charging
• Kensington Security lock ready
• Easily upgradable firmware on all models
• Low heat
• No cables
• No 230 Volt
1.1 Weights and dimensions
Pa
rt
Weight (kg)
Dimensions (cm)
Battery base unit
13,2
Height: 35, Depth: 18, Width: 18
Flight case (empty)
50,7
7 Length: 79, Width: 50, Height: 75 (including wheels).
1.2 Accessories
Six-way charging case; four-way charging case; grindle cap.
1.3 Conformity
LiteWare HO conforms to the following standards:
EN 61000-6-3: Light Industrial Emissions
EN 61000-4-2: Heavy Industrial Immunity