Specifications

25
7. Using external HDMI input
If you want to use the external HDMI input of the xture, you have to activate the external HDMI input via set-
ting DMX value into range of 220-229 on the channel 6 (Special functions). If you want to return back to the
internal HDMI , set DMX value into range of 210-219 on this channel. Stay in desired DMX range for at least
3 seconds.
The horizontal keystone is not running while the Robin MiniMe displayes external HDMI source.
8. Error and information messages
DMX address blinks
It means that no DMX signal is received. Check DMX connectors and cables, check connection between the
xture and the control desk.
Exclamation mark at sign "Art"
It means that no ArtNet signal is received. Check RJ 45 connectors and cables, check connection between the
xture and the control desk.
Tilt Err
This message will appear after the reset of the xture if the head´s magnetic-indexing circuit malfunctions (sen-
sor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The head is not
located in the default position after the reset.
Pan Err
This message will appear after the reset of the xture if the head´s magnetic-indexing circuit malfunctions (sen-
sor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The head is not
located in the default position after the reset.
Focus Err
This message will appear after the reset of the xture if the focus module malfunctions (sensor failed or magnet
is missing) or the stepping motor is defective or its driving IC on the PCB.
Temp Err
This message informs you that head temperature exceeded 70°C and light source has been switched off.
InnCom Err
This message informs you that communication between Raspberry and a pan/tilt PCB is faulty.
Ethernet Err
This message informs you that some ethernet error has occured e.g. faulty network card.
Need Hw Upd
This message informs you that hardware update has to be performed.
No proj. Reply
This message informs you that the projector in the xture head does not communicate with the xture base.