Specifications

Rigging via omega holder:

1-Omega holder with a quarter-turn loks

2-Clamp

3-Trust

4-Attachment point

5-Safety wire

When installing xtures side-by-side, avoid illuminating one xture with

another!

3.3 Positioning the Robin MiniMe

The Robin MiniMe is designed to be installed in one of four possible installation locations:

1. Front Table - the xture is placed near the oor in front of the screen.

2. Front Ceiling - the xture is suspended upside-down from the ceiling (truss) in front of the screen.

Set Ceiling Projection in the menu Personality ("Pers--->"LED Engi" --->"Ceil P"--->"On")

3. Rear Table - the xture is placed near the oor behind the screen. Set Rear Projection in the menu

Personality ("Pers--->"LED Engi" --->"Rear P"--->"On")

Note that a special rear projection screen is required.

4. Rear Ceiling - the xture is suspended upside-down from the ceiling (truss) behind the screen.

Set Rear Projection in the menu Personality ("Pers--->"LED Engi" --->"Ceil P"--->"On") and

Ceiling Projection ("Pers--->"LED Engi" --->"Rear P"--->"On")

Note that a special rear projection screen is required.

When determining the position of the xture and projection screen, you will need to account for the projected

image size, which is directly proportional to the projection distance.