Specifications

4
5
3.Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact.
The StageFaze 1500 AT comes with the following items:
- 1 tank, lid with quick connector,silicon tube and air valve lter
- 1 user manual
Before beginning initial setup of your ROBE Faze machine, make sure that there is no evident damage caused by transportation. In
the event that the unit's housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your ROBE
distributor for assistance.
4.Description of the device
Front view Rear view
1-Nozzle 8- Tilt-lock
2-Control panel 9- Power cord
3-Handle 10-Powe switch
4-Fluid tank 11-Fuse holder
5-Fluid tube 12- DMX IN/OUT (3-pin XLR)
6-Fluid tube inlet 13-DMX IN/OUT (5-pin XLR)
7-Mounting bracket
Tank lid
14-Brass coupling
15-Brass collar
16-Tank lid
17-Check valve
18-Fluid lter