Installation Sheet

Part no. 209-1330 01/06/21
Vesper Edgeline Lights
12
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
SURFACE INSTALLATION
4. With the electrical cover removed, feed the eld wire through the eld wire strain relief at the back of the electrical enclosure.
Note: Refer to your cabinet's Instructions to insure there are no additional assembly steps required prior to proceeding.
5. Mount the cabinet in place following the steps provided in the cabinet's instructions.
6. Make the electrical connection according to the electrical diagram on page 8.
C
L
C
L
Cabinet Width + 1/2"
30 = 16-1/2" (419 mm)
36 = 22-1/2" (572 mm)
40 = 25-7/8 (657 mm)
Left Hand (LH) electrical
enclosure installation
eld wire stub out
30 = 24-3/4" (629 mm)
36 = 30-3/4" (781 mm)
40 = 34-1/8 (867 mm)
Right Hand (RH) electrical
enclosure installation
eld wire stub out