Installation Guide
ASSEMBLY INSTRUCTIONS FOR YOUR
DARIUS ACCENT LAMP
155
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully assembled.
1. Unpack all parts and remove packing materials. Place lamp base on a level surface.
2. Remove ange (B) from socket (C).
3. Place shade (A) onto socket (C). Thread ange (B) back onto the socket to secure the shade to the lamp.
4. Install one 100W max., type A, medium base bulb into the socket.
5. Remove protective plastic from plug (D).
6. Insert plug (D) into wall outlet.
7. Control power to lamp by rotating switch on cord.
**To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.**
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric
shock. This plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted itno the extesion cord
receptacle.
* Switch power o and remove plug from the wall outlet before replacing the bulb.
*This lamp is UL rated for dry locations.
(A)
(B)
(C)
(D)