Installation Guide
DESIREE FLOOR LAMP
ASSEMBLY INSTRUCTIONS FOR YOUR
954
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a
feature to reduce the risk of electric shock. This plug will t in a
polarized outlet only one way. If it does not t fully in the outlet,
reverse the plug. If it still does not t, contact a qualied
electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can
be fully inserted into the extension cord receptical.
* Switch power o and remove plug from the wall outlet before
replacing the bulb.
* This lamp is UL rated for dry locations.
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully assembled.
1. Unpack all parts and remove packing materials. Place lamp base on a
level surface.
2. Remove nial (A) from shade riser (C). Thread shade riser (C) onto
socket housing (D).
3. Place shade (B) onto shade riser (C).
4. Thread nial (A) back onto shade riser (D) to secure placement of
shade.
5. Insert two 100W Max. Type A, medium base bulbs into the sockets
(E).
6. Remove plastic from polarized plug (F). Insert polarized plug (F) into
wall outlet.
**To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.**
(A)
(B)
(C)
(D)
(E)
(F)