Installation & Assembly
ASSEMBLY INSTRUCTIONS FOR YOUR
SMALL TRIPLE GOURD TABLE LAMP
375X
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord
receptical.
* Switch power o and remove plug from the wall outlet before replacing the bulb.
* This lamp is UL rated for dry locations.
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully assembled.
1. Unpack all parts and remove packing materials. Place lamp base on level surface.
2. Secure base by holding neck (E) in place and tightening bolt on the underside of base (F).
3. Remove nial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).
4. Place shade (B) onto harp (C). Thread nial (A) back onto the harp to secure the shade to the lamp.
5. Install one 150W max., type A, medium base bulb into the socket.
6. Remove protective plastic from plug (G).
7. Insert plug (G) into wall outlet.
**To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.**
(A)
(B)
(C)
(D)
(G)
(E)
(F)