Installation Guide

CARE INSTRUCTIONS:
*To clean, use a soft cloth only. DO NOT use any chemical or abrasive cleaners.
*White gloves have been shipped with each xture. Please wear gloves to keep the xture clean during installation.
10082
GLASS DROP INSTALLATION:
**It is recommended that you use needle nose pliers (not included) to install the glass drops (N) and (O).**
1. Remove packaging from glass drops. NOTE: The xture is designed to have alternating size glass drops (N) and (O) on each
frame. It is recommended that you install the glass drops on the bottom ring rst and continue working upwards to the top ring.
2. Start with a large glass drop (O). Notice the metal wire attached to each glass drop has a large and small side. Please see image
above for reference. Insert the longer side of the wire into a hole in the ring. With your index nger guide the smaller side of the
wire into the hole securing glass drop (O) to the ring. NOTE: A small amount of adjustment may be needed for each glass drop to
hang straight.
3. Needle nose pliers are recommended when installing small glass drops (N). Locate the long and short sides of the metal wire
attached to the small glass drop (N). Firmly hold the shorter side of the metal connection with the needle nose pliers (see images
above for reference). Insert the longer side of the wire into the hole on the left side of installed large glass drop (O). Use the
pliers to insert the shorter side of the wire into the hole, securing glass drop (O) to the ring.
4. Repeat steps 2 and 3 for each ring until glass drops (N & O) are completely installed.
ASSEMBLY INSTRUCTIONS FOR YOUR
BLING RECTANGULAR CHANDELIER