Installation Guide
414
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials. Place
lamp base on a level surface.
2. Remove nial (A) from harp (C). Squeeze harp (C) inward
and place into the opening of saddle (D).
3. Place shade (B) onto harp (C). Thread nial (A) back onto
the harp to secure the shade to the lamp.
4. Install one 150W max., type A, medium base bulb into the
socket.
5. Remove protective plastic from plug (E).
6. Insert plug (E) into wall outlet.
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way. If
it does not t fully in the outlet, reverse the plug. If it still
does not t, contact a qualied electrician. Do NOT alter
the plug.
* Do not use with an extension cord unless the plug from the
lamp can be fully inserted into the extension cord
receptacle.
* Switch power o and remove plug from the wall outlet
before replacing the bulb.
* This lamp is UL rated for dry locations.
ASSEMBLY INSTRUCTIONS FOR YOUR
TODD FLOOR LAMP
**To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.**
(A)
(B)
(C)
(D)
(E)