User's Manual Part 4

44 | en
Notes:
f If you delete a waypoint, the route is
recalculated and displayed in the
map view.
f If you delete all waypoints and the
final destination, the route guidance
session is cancelled.
f To start route guidance from within the
details view, tap k.
8.4 Storing the home address
You can store a home address. This address
appears at the top of the list of your favourites
(see the section entitled “Selecting one of the
previous destinations or a destination stored as
a favourite” (page 42)).
Note:
If a home address has already been
stored, it will be replaced/overwritten
by the new address after confirmation.
f In the Destinations menu, tap the Favourites
tab.
f Tap Home.
f Tap Current position to store the current
position as the home address.
Or:
f Tap Enter address to specify an address.
f Enter the address as described in the section
entitled “Entering an address” (page 39).
f After specifying the address, tap Set as
home to store the entered address as the
home address.
8.5 Entering a waypoint
As soon as you have started route guidance to a
destination, you can enter up to 5 further desti-
nations as waypoints.
Note:
The order in which you enter additional
waypoints cannot be changed after-
wards. Each waypoint that you add will
be placed on the route before the desti-
nation. So the last waypoint that you
add will be the last waypoint on your
route.
f Enter the new destination as described in the
section entitled “Entering a destination”
(page 39).
As soon as you tap , the Route guidance is
active notification appears.
f Tap Add as waypoint.
The new destination is inserted in the route as a
waypoint. The system calculates the route to the
waypoint.
8.6 Changing the destination while
route guidance is active
You can change the destination or waypoint
while route guidance is active.
f Enter the new destination as described in the
section entitled “Entering a destination”
(page 39).
As soon as you tap , the Route guidance is
active notification appears.
f Tap Replace destination or Add as way-
point.
The system calculates the route to the new
destination.
8.7 Map view and map options
8.7.1 Opening the map view
f Tap the Drive area in the Home menu.
or:
f Tap in the Destinations menu.
8.7.2 The map view during an
active route guidance session
An active route guidance session is displayed in
the map view. Driving recommendations are
provided in visual form (see below) and as
announcements.
Navigation