User's Manual Part 4

en | 39
map. If a navigation instruction
contradicts traffic regulations, the
traffic regulations always apply.
Note:
This navigation system calculates the
current vehicle position using satellite
signals, various vehicle signals, map
data, etc. However, an accurate posi-
tion may not be shown depending on
satellite condition, Road configuration,
vehicle condition or other circum-
stances.
8.1 Starting navigation
Note:
Ensure that the SD card containing the
navigation system’s map data is
inserted in the SD card slot 3.
The navigation function is only avail-
able when the SD card containing the
map data is inserted.
To open the map view,
f tap the Drive area in the Home menu.
To open the Destinations menu,
f tap the direct-select button in the Home
menu.
8.2 Entering a destination
8.2.1 Opening the Destinations
menu
f Tap the direct-select button in the Home
menu.
or:
f Tap in the map view.
The Destinations menu is displayed:
Note:
If a route guidance session is active,
the Route menu of the Destinations
menu will be displayed. For more
details please refer to the section
entitled “Route guidance settings in the
Route menu” (page 46).
Under the New tab, you can specify a new desti-
nation.
Please refer to the sections “Entering an
address” (page 39) and “Selecting a point of
interest” (page 41).
If you switch to the Previous tab or Favourites
tab, you can select a previous destination or a
stored favourite as your new destination.
Please refer to the section entitled “Selecting
one of the previous destinations or a destination
stored as a favourite” (page 42).
8.2.2 Entering an address
f In the Destinations menu, tap the New tab, if
necessary.
f Tap New address.
The Address input menu is displayed.
Enter the following address components in this
order:
1. Country
2. City / Postcode
3. Street
4. Intersection or House number
To enter an address component,
f tap the relevant item.
Navigation