User's Manual Part 6

en | 63
Notes:
f Android connection priority only
applies if the MirrorLink™ and
Android Auto features are available
on the same smartphone. One
feature, i.e. either MirrorLink™ or
Android Auto, can be chosen at a
time.
f A change to the Android connection
priority setting only takes effect
after the smartphone is discon-
nected.
10.3.2 Enabling the keypad lock
while driving
You can set the keypad lock in the system set-
tings.
If the Lock keypad while driving setting is ena-
bled, you will only be able to access the keypad
while the vehicle is stationary.
For further details on this, please read the sec-
tion entitled “Enabling the keypad lock while
driving” (page 15).
Note:
This function applies to the Apple
CarPlay and Android Auto features but
does not apply to the MirrorLink™
feature.
11 Rear-view camera
Note:
This function is only available if the
vehicle is equipped with a rear view
camera.
The picture from the rear-view camera is auto-
matically shown on the display for as long as the
reverse gear is engaged.
Road safety
When reversing, if you only look at the
picture provided by the rear-view cam-
era, you may fail to notice other road
users or objects outside the picture
and may cause an accident.
Therefore, please always also pay
attention to your vehicle’s surround-
ings.
11.1 Picture settings for the rear-
view camera
Note:
You can only change the settings while
the reverse gear is engaged.
11.1.1 Guide lines – on/off
The superimposed guide lines project the
dimensions of the vehicle onto the section of
road behind.
f Tap 6.
f Tap Guide lines.
The guide lines are shown when the check mark
is displayed in the checkbox.
Note:
Tap 6 to close the settings.
Smartphone integration | Rear-view camera