User's Manual

en | 45
02.2012Robert Bosch Car Multimedia GmbH
en
buttons > and the ENTER button F to
control the audio/video source that is active in
the cabin. The focus of control will switch back
automatically to the cockpit approximately 10
seconds after the last button press.
Notes:
f The current focus of control is
indicated in the display (“COCK-
PIT” or “CABIN”).
f The focus of control will also
switch over to the cabin when
you select a different audio/
video source for the cabin.
f You can manually return the
focus of control to the cockpit by
pressing the control knob <.
f When you select the navigation
system as the source in the
cockpit, the focus of control will
switch to the navigation unit (see
the chapter entitled "Navigation
functions on the CCS").
Selecting functions and adjusting settings | Selecting an audio/video source
Selecting an audio/video source
Selecting an audio/video source for the cockpit
Function Action Note
Select the radio
f Press the RADIO button I
–
Select the CD in the
CCD drive
f Press the CD button I
–
Select AUX/USB
f Press the AUX button I (if
necessary, several times)
AUX can only selected if the
AUX input has been activated
(see the chapter entitled
“Further system settings”).
You can only select USB if a
data storage medium is
connected.
Select the DVD/CD in
the CCS drive or video
source 1 or 2
f Press the VIDEO button I (if
necessary, several times)
You can only select video
source 1 or 2 if an external
device (e.g. a DVD, TV, or
DVC) is connected.
02_ProLine3_en.indd 45 23.02.12 18:36