User's Manual

en | 49
02.2012Robert Bosch Car Multimedia GmbH
en
Adjusting the volume and sound
Volume and sound for microphone announcements
Functions on the CCS
Function Action Note
Adjust the volume f Turn the control knob ? Only whilst the microphone is
switched on.
Set the distribution of the
volume between the
announcement and the
background audio
playback (MIX)
f Whilst keeping the control
knob ? pressed down, turn
it
Only whilst microphone 2 or 3
(MIC2 / MIC3) is switched on.
Open the menu
f Briefly press the MENU
button D
For sound adjustments in the
menu, see the next section.
Functions in the microphone menu
1
st
Menu level 2
nd
Menu level Function
BASS BASS -7 ... +7 Adjust the bass level
TREBLE TREBLE -7 ... +7 Adjust the treble level
Volume and sound for external announcements and alarms (driver warning
system)
You can adjust the volume and sound for
external announcements (e.g. navigation
announcements and phone calls played over the
cockpit loudspeakers) as well as for alarms.
Functions on the CCS
Function Action Note
Adjust the volume f Turn the control knob < Only during an active
announcement.
Set the distribution of the
volume between the
announcement and the
background audio playback
(MIX)
f Whilst keeping the control
knob < pressed down, turn
it
Only for navigation announce-
ments and phone calls. Only
during an active announcement.
Open the menu
f Briefly press the MENU
button D
Only during an active alarm.
For sound adjustments in the
menu, see the next section.
02_ProLine3_en.indd 49 23.02.12 18:36