User's Guide

ManualsBrandsRobert Bosch Car Multimedia ManualsElectronicsRadio Navigation System with Bluetooth

JOBNAME: 1093929-2013-asd-own PAGE: 301 SESS: 5 OUTPUT: Tue Mar 27 10:39:14 2012

To use the engine block heater:

1. Turn the engine off.

2. Open the hood and unwrap the engine block

heater cord.

3. Plug the engine block heater cord into a

grounded 3-wire, 3-pronged extension

cord.

4. Plug the extension cord into a Ground Fault

Interrupt (GFI) protected, grounded 110-

volt AC (VAC) outlet.

5. The engine block heater must be plugged in

for at least 2 - 4 hours, depending on outside

temperatures, to properly warm the engine

coolant. Use an appropriate timer to turn the

engine block heater on.

6. Before starting the engine, unplug and prop-

erly store the cord to keep it away from

moving parts.

Starting and driving 5-29

Z REVIEW COPY—

2013 Altima Sedan (asd)

Owners Manual—USA_English (nna)

03/27/12—dmoore

X