User's Manual

JOBNAME: 1485166-2014-l2k-nav PAGE: 46 SESS: 4 OUTPUT: Tue Jun 11 14:46:07 2013
● The system recognizes the user-defined
points of interest (POI) data and then asks the
user via a pop-up message if the data needs
to be downloaded into the system.
● If you confirm the download, the available user
Points of Interest in the system internal
memory will be deleted and the new ones in
the USB mass storage device will be down-
loaded into the internal memory of the system.
● The progress of the download is shown by a
progress-bar. When the download is finished,
the user is notified that the USB mass storage
device can be removed.
Creating user-defined points of inter-
est (POIs)
h
1
Longitude
h
2
Latitude
h
3
Name
h
4
Location/Folder to save
h
5
File name
POI data can be downloaded from the Internet
or created in a simple text editor in CSV (Comma
Separated Values) file format.
There are two kinds of POI data supported by
the system:
● User POIs – user-defined points of interest
(POI) that can later be set as a destination
and found using route guidance.
● POI-warnings – user-supplied areas such as
hazard spots that the system displays in a
pop-up window when the vehicle is ap-
proaching the designated area.
LNV1017
4-14 Navigation
Z REVIEW COPY— 2014 Low Cost Navi 2 Kai (l2k)
Navigation System OM—USA_English (nna)
06/11/13—tbrooks
X