User's Manual

Black plate (33,1)
Cadillac XTS Infotainment System - 2013
Infotainment System 33
To use the remote control, aim it at
the transmitter window at either
seatback console and press the
button. Direct sunlight or very bright
light could affect the ability of the
RSE transmitter to receive signals
from the remote control. Check the
batteries if the remote control does
not seem to be working. See
“Battery Replacement” later in this
section. Objects blocking the line of
sight could also affect the function
of the remote control.
If a CD, DVD, or MP3 disc is in the
Radio DVD slot, the remote control
O button can be used to turn on the
video screen display and start the
disc. The infotainment system can
also turn on the video screen
display.
Changing the RSE Video Screen
Settings
The brightness can be changed
from the setup menu using the
remote control. To change a setting:
1. Press MENU.
2. Press Brightness and then use
o or p to adjust the settings.
3. Press
/ BACK to exit the
setup menu.
Notice: Storing the remote
control in a hot area or in direct
sunlight can damage it, and the
repairs will not be covered by the
warranty. Storage in extreme cold
can weaken the batteries. Keep
the remote control stored in a
cool, dry place.
Replacing the Remote Control
If the remote control becomes lost
or damaged, a new universal
remote control can be purchased.
Use a Toshiba® code set for
replacement universal remote
controls.
Battery Replacement
To change the remote control
batteries:
1. Slide back the rear cover on the
remote control.
2. Replace the two batteries in the
compartment.
3. Replace the battery cover.
Remove the batteries from the
remote control if unused for an
extended period of time.
No power: The ignition might not
be turned to ON/RUN or ACC/
ACCESSORY.
The picture does not fill the
screen. There are black borders
on the top and bottom or on both
sides or it looks stretched out:
Check the display mode settings in
the setup menu by pressing the
display menu button on the remote
control.
In auxiliary mode, the picture
moves or scrolls: Check the
auxiliary input connections at both
devices.
The remote control does not
work: Check to make sure there is
no obstruction between the remote
control and the transmitter window.