User's Manual

en | 59
7 620 000 142/143 | 10.2013Robert Bosch Car Multimedia GmbH
en
Bluetooth telephoning
Accepting and rejecting incoming
calls
When a call arrives, a ringtone will sound and
“CALL” appears briefly on the display followed
by the name or number of the caller or
“PRIVATE NUMBER” if no caller details are
available.
Note:
Turn the volume control
1
anticlock-
wise or clockwise to adjust the
volume of the ringtone.
To accept the call,
f press the button
2
.
“IN CALL” is shown on the display during the
call.
Notes:
f Turn the volume control
1
anticlockwise or clockwise to
adjust the volume of the caller’s
voice.
f If you receive another call during
the current call, a tone will sound
and the second call will be
rejected automatically (this
function is only available if the
connected Bluetooth device
supports it).
To reject the call,
f press the button
5
.
Ending a call
To end a phone call,
f press the button
5
.
“CALL END” appears briefly on the display.
Calling a contact from the phone
book
f Long press the SRC
<
button.
The first contact in the phone book appears on
the display.
f Press the or
6
button repeatedly
until the desired contact is displayed.
Note:
Using the or
6
button you can
jump to the first entry of the next/
previous available initial letter.
f Press the button
2
to call the
selected contact.
Displaying the Bluetooth name of
the connected device
To display the name of the currently connected
Bluetooth device,
f long press the MENU
5
button.
The name will be shown briefly in the display if
it is shorter than or equal to 8 characters.
Longer names are displayed as scrolling text
once and then the first 8 characters are shown
briefly in the display.
Bluetooth telephoning
02_Rotterdam_UBT_en.indd 59 15.10.13 11:07