User's Manual

60 | en
7 620 000 142/143 | 10.2013 Robert Bosch Car Multimedia GmbH
Bluetooth audio
Activating Bluetooth audio mode
f Press the SRC
<
button repeatedly until
“BT AUDIO” appears on the display.
Playback begins. At the beginning of each
track, the track name (if available) is shown on
the display or else “TITLE UNKNOWN”.
Note:
If Bluetooth audio mode is not
possible, one of the following
indicators appears on the display:
f “BT OFF” if Bluetooth is
deactivated
f “NO UNIT” if no Bluetooth audio
device is connected
f “UNKNOWN” if the connected
Bluetooth device does not
provide any audio
Selecting tracks
f Press the or
6
button to switch to
the previous or next track.
If the current track has already been playing for
longer than 10 seconds, it will be restarted if
you press the
6
button once.
Pausing playback (PAUSE)
Press the 1 : button.
f “PAUSE” appears on the display.
Canceling pause
While pause is enabled,
f press the 1 : button or
3
button.
Playback resumes.
Technical data
Operating voltage
7 620 000 142: 12 V
7 620 000 143: 24 V
Standby current:
7 620 000 142: < 300 �A
7 620 000 143: < 500 �A
Amplifier
Output power:
7 620 000 142: 4 x 20 Watt sine wave
into 4 ohms
7 620 000 143: 2 x 20 Watt sine wave
into 4 ohms
Preamp output: 2 x 2.0 V rms
AUX input: 2 x 2.0 V rms
Tuner
Wavebands in Europe:
VHF (FM): 87.5 – 108 MHz
MW: 531 – 1602 kHz
LW: 153 – 279 kHz
SW: 5800 – 6300 kHz
NAFTA wavebands:
FM: 87.7 – 107.9 MHz
AM: 530 – 1710 kHz
WX: 162.4 – 162.55 MHz
FM frequency response: 30 – 15000 Hz
Subject to changes!
Bluetooth audio | Technical data
02_Rotterdam_UBT_en.indd 60 15.10.13 11:07