User's Manual

IP Camera 200 Series Installation | en 25
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.07
3.8 Resetting the camera
If the camera cannot be connected because the IP address has
changed, press and hold the reset button (7 seconds
approximately) until the LED flashes (red) to recall the factory
default values. The factory default IP address is 192.168.0.1
Figure 3.8 Reset button
1 2 3 4
DC12V Ethernet
Line-out Reset
Line-in
I/O