User's Manual

DO NOT operate the pipe laser tool in combustible areas such as in the presence of flammable liquids, gases or dust.
ALWAYS position the pipe laser tool securely. Damage to the pipe laser tool and/or serious injury to the user
could result if the pipe laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of your pipe laser tool . Use of
accessories that have been designed for use with other pipe laser tool s could result in serious injury.
DO NOT use this pipe laser tool for any purpose other than those outlined in this manual. This could result in
serious injury.
DO NOT leave pipe laser tool "ON" unattended in any operating mode.
ALWAYS repair and servicing must be performed by a qualified repair facility. Repairs performed by unqualified
personnel could result in serious injury.
DO NOT disassemble the pipe laser tool . There are no user serviceable parts inside. Disassembling the laser
will void all warranties on the product. Do not modify the product in any way. Modifying the pipe laser tool
may result in hazardous laser radiation exposure.
ELECTRICAL SAFETY PROCEDURES
WARNING: Batteries can explode or leak, and can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time with new batteries of the same brand
and type.
DO NOT mix battery chemistries.
DISPOSE of batteries per local code.
DO NOT dispose of batteries in fire.
KEEP batteries out of reach of children.
REMOVE batteries if the device will not be used for several months.
CERTIFICATIONS
This laser complies with all applicable portions of title 21 of the Code of Federal Regulations set by the Food and
Drug Administrations, Center for Devices, and Radiological Health. Complies with 21CFR 1040.10 and 10040.11
except for deviations pursuant to Laser notice No. 50, dated June 24, 2007.
This LMPL20 has also been tested and complies with the CE certification requirements set forth in the EC
regulations 89/336/EEC and EN 61000-6-1 (EN50082-1), EN 61000-6-3 (EN50081-1) and EN 60825-1.
LMPL20
RC20
ENVIRONMENT PROTECTION
Recycle raw materials & batteries instead of disposing of waste. The unit, accessories, packaging &
used batteries should be sorted for environmentally friendly recycling in accordance with the your
countries latest regulations.
LMPL20 • 7
Contains FCC ID: MCQ-XBEEPRO2
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (i.) this device may not cause
harmful interference and (ii.) this device must accept any interference received, including interference that may cause undesired operation.
Contains Model XBee-PRO Radio, IC: 1846A-XBEEPRO2
ID: 005NYCA0378
Contains FCC ID: TXT - F034K69P01
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (i.) this device may not cause
harmful interference and (ii.) this device must accept any interference received, including interference that may cause undesired operation.
Contains Model XBee-PRO Radio, IC: 909G-F034K69P01
ID: 005NYCA0378