User's Manual

SECTION 6: LINEAR & DOUBLE LINEAR HEATER INSTALLATION
13 of 75
SECTION 6: LINEAR & DOUBLE LINEAR HEATER INSTALLATION
The figures in this section provide a general overview of
component placement in a BLACKHEAT
®
Linear and
Double Linear system. The location of some components
such as supports and couplings is crucial for proper
installation. Assemble the heater components as shown
on Page 14, Figure 19.
For optional reflector configurations for linear heaters see
Page 6, Figure 3 through Page 7, Figure 10. Install
appropriate suspension hardware, beam clamps, chain or
rod at predetermined locations. Adjustments of chain
length will provide uniform pitch.
If any step is unclear, please contact Roberts-Gordon at
[phone].
6.1 Linear Standard Parts List
* PVC coating must be removed prior to installation.
** Some models may receive S-hooks (P/N 91907302) or
spring hooks (P/N 919003300), rather than bow
shackles.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.
Part No. Description
BH15ST BH20ST BH25ST BH25ST/EF BH30ST BH30ST/EF BH35ST BH35ST/EF BH40ST BH40ST/EF BH45ST BH45ST/EF BH50ST BH50ST/EF BH55ST
072XXXXX Burner Assembly (Input and Fuel Varies) 111111111
07260001Fan Package XP 1 1111- ----
07260002Fan Package XP2 ----111--
07260003Fan Package XP 3 -------1-
03051100Burner Tube, 100 mm x 3048 mm 111111111
91409408Tube, 100 mm x 3048 mm -11222334
S5127WFan Tube, 100 mm x 3048 mm, with 3048 mm Swirler -11111111
S5134WFan Tube, 100 mm x 3048 mm, with 2134 mm Swirler 1--------
01329600 Standard Coupling Assembly 122333445
01329700Coupling Lock 122333445
02750303Reflector, Aluminium, 2439 mm 344666778
027503SSReflector, Stainless Steel, 2439 mm (Optional)* 344666778
02750800Reflector End Cap, Aluminium 222222222
027508SH Reflector End Cap, Stainless (Optional)* 222222222
03090100Tube and Reflector Hanger 344555667
01318901 Tube Clamp Package (including Nut, Washer & Bolt) 111111111
91908004Wire Form 233555667
94320812 Screw #8 x 3/4 (3.9mm x 19mm), (goes with 03050000) 4 6 6 10 10 10 12 12 14
03050000Reflector Support Strap 233555667
E0007576 Bow Shackle** 344555667
91107720 U-Clip Package (20 Pieces) 111111111
S7199K Damper Flange Assembly (For use on Multiburner Systems) 1 Per Heater