Service manual

Severe Injury Hazard
Install guard before
operating high speed
rotating impeller.
Keep hands, fingers and
clothing away from inlet
and outlet.
Install and operate
equipment according to
installation manual.
Failure to follow these
instructions will result in
death or severe injury.
P/N 91012100 Rev. A
Printed in the U.S.A./
Imprimé aux États-Unis
©
Risque de blessures graves
Installer la protection avant
de faire fonctionner limpul-
seur rotatif de haute vitesse.
Tenir les mains, les doigts
et les vêtements à lécart des
prises dentrée et de sortie.
Installer et opérer lappareil
suivant les indications conte-
nues dans le manuel dinstall-
ation.
Si vous ne suivez pas ces ins-
tructions, vous risquez la
mort ou des blessures graves.
DANGER
DANGER
3
Unpacking the Pump
Unpack the
Pump
Examine shipping cartons for external damage. Note any
damage in the presence of the carrier. Have the carrier initial the
"noted" Bill of Lading.
Orient vacuum pump shipping cartons with arrows on cartons
pointing upward.
Open cartons and remove packing inserts.
Carefully remove vacuum pump components from the shipping
cartons.
CAUTION
Do not lift the vacuum pump assembly by grasping the impeller. Lift assembly by gripping metal
pump frame.
This pump has been tested prior to packing. The impeller was dynamically balanced before
assembly and requires care in handling to avoid damage.
Failure to follow these instructions can result in product damage.
Unpack Pump
SECTION 1: UNPACKING THE VACUUM PUMP