User's Manual

BLACKHEAT® INSTALLATION OPERATION AND SERVICE MANUAL
20
Step 7.4.1 Coupling and Tube Assembly (Continued)
Step 7.4.2 Coupling and Tube Assembly (Continued)
WARNING
Tighten slidebar as shown below.
Tubes will fall down if slidebar is incorrect.
Failure to follow these instructions can result in death,
injury or property damage.
Incorrect slidebar
position
Correct slidebar
dimensions
± 5 cm
Drive Slidebar until tight.
End of slidebar should be
within tolerance listed below.
• Repeat Step 7.4 A - D until all tubes are assembled, See Page 20, Section 7.4.2 shown below.
305 cm Typ
± 25 cm
229 cm
± 25 cm
Total Overall
Tube Length
Model
Heat Exchanger
Overall Tubing Length (m)
Number
of Tubes
BH15 6 2
BH20 9 3
BH25 9 3
BH30 12 4
BH35 12 4
BH40 12 4
BH45 15 5
BH50 15 5