Operation Manual

Connecting Bluetooth devices

1. Ensure that the Bluetooth capability on your phone, tablet or PC is

enabled. You may need to refer to the user documentation for your

device, since the method will vary with each device.

2. Press and release the On/Standby button to switch on the sound

system.

3. Repeatedly, press and release the Mode button on your sound system

until the Bluetooth mode is selected. Your sound system will show that

it is 'discoverable' by ﬂ ashing the Bluetooth indicator (on the front

panel, not the one on the display) and showing 'Bluetooth Pairing...'

on the display.

4. Using the Bluetooth settings of your phone, tablet or PC direct it to

search for 'discoverable' devices. After a few seconds, you should see

a device named 'Blutune 100'. Just occasionally it may take longer for

the sound system to be found by your device.

5. Select 'Blutune 100' to cause your phone, tablet or PC to pair with

your sound system and to establish a connection.

6. Once the connection is established, the Bluetooth indicator on the

front panel will stop ﬂ ashing and will remain lit. A message will be

displayed brieﬂ y conﬁ rming the name of the connected device.

You can now begin playing music from your smart-phone, tablet, etc.

Some Bluetooth devices may require a 'Passkey' (an authentication key)

in order to establish a link between devices. A passkey is similar to a

password, although you only need to use the passkey once to establish

a link. If your device asks for a passkey to be able to pair with your radio

then enter a code of 0000 (four zeroes).

Bluetooth

PAIRING

BT connected:

Julia’s phone

Bluetooth