Operation Manual

Inserting a CD
Ensure the CD player is empty before inserting a disc. If there is a disc in
the player then the CD loaded indicator will be lit. If you cannot insert a
disc, press the CD Eject button to remove the CD currently in the player.
1. Press and release the On / Standby button to switch on your sound
system.
2. To select the CD mode press the Mode button until 'CD' shows on the
upper line of the display.
3. To eject a CD press and release the CD Eject button. To reload a CD
that has just been ejected, press the Eject button a second time.
4. Insert a disc with printed side facing up into the CD slot. The disc will
be loaded automatically. The unit will check the CD type and load its
track list. The display will show 'LOADING' and then 'READING' as
the information is read.
5. If you load a disc containing MP3 or WMA fi les your sound system
will enter the MP3 / WMA mode (see page 34).
Playing a CD
1. Press the Play / Pause button to start playing the disc. The display
will show the fi rst track number.
2. Adjust the Volume to the required setting.
3. To pause playing press the Play / Pause button. To resume press the
Play / Pause button again.
4. To stop playback, press the Stop button.
CD / MP3 / WMA
30
1
2
3
CD
READING
001 01:44
>
1,3
001 01:44
4