Operation Manual

Alarms

Your sound system has two alarms which can each be set to wake you

to DAB, FM radio, CD or buzzer alarm. The alarms may be set while the

unit is in standby mode or while playing.

Note: If no buttons are pressed for several seconds, your sound system

will exit the alarm setup. To exit the alarm setup at any time press and

release the Menu button as needed.

1. Before setting an alarm ensure that the clock time is set (see page 42).

Press and hold the Menu button.

2. Press the Tuning Up or Down buttons until 'Set alarm' shows on the

display. Press and release the Select button to enter the alarm setup

menu.

3. Press the Tuning Up or Down buttons to display the required alarm,

1 or 2. Press and release the Select button 'Alarm Setting' will show

on the display.

4. Press and release the Select button to choose alarm setting. 'Alarm:

On/Off' will show on the upper line of the text display.

5. Press the Tuning Up or Down buttons to choose whether to set the

alarm to On or Off. If Off is selected, the unit will exit the alarm menu.

6. With 'On' selected on the display, press and release the Select button.

'Alarm: Time' will show on the upper line of the text display and the

Alarm hour digits will ﬂ ash.

2-6

2-5

Alarm 1

Setting

Alarm 1: On/Off

Alarm 1: Time

07:00

Set alarm