Operation Manual

13. Press the Tuning Up or Down buttons to select the desired alarm

volume.

14. Press and release the Select button to conﬁ rm the alarm settings.

The sound system will exit the alarm menu.

Active alarms are indicated in the display by the

symbol and the

corresponding alarm number.

When the alarm sounds

The alarm will sound at the selected times for up to 60 minutes unless

cancelled. The volume used for the alarm will be speciﬁ ed during the

alarm setting procedure. If the radio cannot connect to the speciﬁ ed radio

station, the buzzer will be used instead.

Note: If the radio is switched on because of a radio alarm you can only

use the volume and on/off controls. See Snooze function on the next page.

When the buzzer alarm activates it will start softly and gradually increase

in level.

The alarm icon will ﬂ ash on the screen and the radio will automatically

switch back to standby mode when the 60 minutes have elapsed.

Cancelling an alarm

To cancel the alarm press while it is sounding and release the On /

Standby button.

To cancel an alarm at any other time, enter the alarm setup menu and set

the alarm On/Off option to 'Off'. See steps 1-5 page 37.

Alarm 1: Vol

Alarm

cancelled