Operation Manual

Audio and Setup

Standby brightness control

The brightness of the display when the unit is in standby mode may be

adjusted. If you use the unit in the bedroom, you may prefer a lower standby

brightness level than the standard setting.

The standby brightness level may be set while the unit is in standby or

while it is playing.

1. Press and hold the Menu button.

2. Press the Tuning Up or Down buttons until the display shows 'Set

Brightness' on the lower line of the text display.

3. Press and release the Select button to show the current setting.

4. Press the Tuning Up or Down buttons to change the standby brightness

level. The backlight level will change at the same time so that you can

see the effect of the change when the unit is in standby mode.

5. Press and release the Select button to save the new setting.

The default setting after a system reset is 5. Possible brightness values

range from 1 - 7.

3,5

2,4

Set Brightness