Operation Manual

49
System reset
If your sound system fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure.
1. Press and hold the Menu button.
2. Press the Tuning Up or Down buttons until the display shows 'System
reset'.
3. Press and release the Select button. The display will show 'Press
SELECT to reset'.
4. Press and release the Select button again to confi rm the reset operation.
5. A full reset will be performed. The station list and presets will be erased.
Alarms will be cancelled, audio equaliser and display brightness settings
will have been set to their default values. The clock will be reset and
the unit will behave as when fi rst switched on (see page 9).
In case of malfunction due to electrostatic discharge, reset the product
using the above procedure. In some circumstances it may be necessary
to disconnect and then reconnect the mains power in order to resume
normal operation.
If a problem persists please refer to the guarantee section at the back
of this instruction book which explains how to obtain support for your
sound system.
1
3,4
2
2
System reset
<
>
Press SELECT to
reset...
Resetting...